Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- category: Coating waterproofing
S-COMPOSIT STANDART™ It is a single-component thin layer of polyurethane. It strengthens the concrete floor, protects it from mechanical and chemical... See more
S-COMPOSIT STANDART™ It is a single-component thin layer of polyurethane. It strengthens the concrete floor, protects it from mechanical and chemical influences. It is used as a paint and varnish on concrete, metal and wooden surfaces. The dried product has high elasticity, strength and resistance to mechanical and chemical agents. The material should be avoided from direct contact with sunlight, as it changes color and loses strength under the influence of sunlight. After drying, the color of the material is yellowish.
See less
S-COMPOSIT STANDART™ Designed to protect:
Walls, ceilings, concrete, wood and metal structures from mechanical and chemical influences;
To provide the surface with corrosion resistance, water resistance and protection against damage.
S-COMPOSIT STANDARD™ Advantages:
High wear resistance and resistance to chemical influences;
Dust removal from concrete surfaces;
Easy to use; Creates a glossy surface;
Can be applied from - 30°C to + 40°C;
Products offered
expanding cement mortar for injection works 20 kg - Stabilcem
- category: Coating waterproofing
- Brands: MAPEI
BUTA Waterproofing Mastic (Rubber Based) 18L
- category: Coating waterproofing
- Brands: BUTA project
Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- category: Coating waterproofing
- Brands: MAPEI
Two-component injection solution Foamjet F 20+23kg
- category: Coating waterproofing
- Brands: MAPEI
Polyurethane waterproofing Purtop Easy / 25 kg
- category: Coating waterproofing
- Brands: MAPEI
Two-component injection solution Foamjet T 20+24kg
- category: Coating waterproofing
- Brands: MAPEI
Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- category: Coating waterproofing
- Brands: FOX BAU
Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- category: Coating waterproofing
- Brands: FOX BAU
Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- category: Coating waterproofing
- Brands: FOX BAU
Coating waterproofing FOX WATERPROF FS100 4 kg
- category: Coating waterproofing
- Brands: FOX BAU
ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- category: Coating waterproofing
- Brands: ICOBIT
Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO
- category: Coating waterproofing
- Brands: ICOBIT
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
choose a product
- expanding cement mortar for injection works 20 kg - Stabilcem
- BUTA Waterproofing Mastic (Rubber Based) 18L
- FOX MORTAR FC188 T 25kg
- Bitumen waterproofing Icopas 18kg
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- Two-component injection solution Foamjet F 20+23kg
- Polyurethane waterproofing Purtop Easy / 25 kg
- Two-component injection solution Foamjet T 20+24kg
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- Coating waterproofing FOX WATERPROF FS100 4 kg
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO
- Epoxy Mortar FOX EPOMORTAR FC510
S-COMPOSIT STANDART™ Designed to protect:
Walls, ceilings, concrete, wood and metal structures from mechanical and chemical influences;
To provide the surface with corrosion resistance, water resistance and protection against damage.
S-COMPOSIT STANDARD™ Advantages:
High wear resistance and resistance to chemical influences;
Dust removal from concrete surfaces;
Easy to use; Creates a glossy surface;
Can be applied from - 30°C to + 40°C;