Waterproofing material R-COMPOSIT 10 KG
- category: Coating waterproofing / Waterproofing
R-COMPOSIT provides effective protection of roofs from atmospheric influences, precipitation, significantly reduces the impact of solar... See more
R-COMPOSIT provides effective protection of roofs from atmospheric influences, precipitation, significantly reduces the impact of solar radiation and other environmental factors on the roof. R-COMPOSIT is used as a primer. Applied in 2 layers: the first layer is diluted in water in the following proportion: 1 part R-COMPOSIT, 5 parts water; the second layer is 1:1. Drying requires 2 hours at an ambient temperature of +20°C and 70% humidity.
See less
R-COMPOSIT is used wherever bitumen or similar materials are recommended. After drying, it forms a white glossy surface that is waterproof and resistant to any weather conditions. The material is characterized by excellent adhesion to any surface (concrete, metal, ceramic tile, plaster, brick, and others...); unlike other waterproofing materials, it has vapor permeability, allows steam to pass through its surface, and extends its service life; has low thermal conductivity and solar reflection (the color of the coating reduces solar radiation); resistant to chemicals, excellently withstands frost (-30°C) and high temperatures (+100°C); is a non-flammable material, does not contain organic additives and therefore can be used in fire-hazardous places; the material can be applied with a roller and brush, and can also be applied with a high-pressure compressor; does not require additional materials and can be used as a finishing layer.
R-COMPOSIT is a unique liquid polymer waterproofing material. The material is designed for the following objects: roofs that have complex geometric contours; where the use of bitumen membranes is difficult; roofs and surfaces that are loaded with engineering utility equipment and have complex geometric shapes and require waterproofing; all areas where there is a risk of water leakage.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Waterproofing material R-COMPOSIT 10 KG
choose a product
- Epoxy Mortar FOX EPOMORTAR FC510
- Polyurethane waterproofing Purtop Easy / 25 kg
- expanding cement mortar for injection works 20 kg - Stabilcem
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- BUTA Waterproofing Mastic (Rubber Based) 18L
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO
- Cement-based waterproofing – FOX MULTISEAL FS367 25kg
- Connecting insulation tape FOX MONOTAPE 120/70 mm 50 m
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- FOX FASTMORTAR FC233 25kg
- FOX GROUT FC155 (R4) 25kg
- waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- Unreinforced TPO membrane MAPEPLAN T D 15 (1.05 × 20m)
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- IMPER GARANT Н - 4 kg / m2, EPP 10 m2
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- PVC water outlet MAPEPLAN SQUARE WALL OUTLET, box of 10 pcs
- PVC membrane corner MAPEPLAN EXTERNAL WAVY CORNER PLUS
- IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- Hydroisol TPP 3.5 (1*10m2)
- Two-component injection solution Foamjet F 20+23kg
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- Self-adhesive waterproofing tape 20x1000 cm - BUTYLSTRIP
- Hydrostekloizol EPP - 3.5
- FOX MORTAR FC188 T 25kg