BUTA Waterproofing Mastic (Rubber Based) 18L
- category: Coating waterproofing / Waterproofing
- Brands: BUTA project
Rubber-based mastic "Buta Project" is a ready multi-component material consisting of petroleum bitumen, crumb rubber, and organic solvent. The crumb r... See more
Country of manufacture: Azerbaijan
See less
Work should be carried out at temperatures between -10°C and +40°C. At temperatures below +5°C, the mastic should be stored at room temperature for at least one day beforehand. Do not use near open flames. Work must be performed in rooms equipped with ventilation systems. Avoid contact with skin and eyes. Use indoors is not recommended. In case of skin contact, wash the mastic off with a solvent.
The mastic "Buta Project" is used for waterproofing, roof installation and repair, anti-corrosion protection of concrete, metal, and other building structures, as well as for fastening various construction materials (fiberboard, plywood, glass, hydro glass insulation (waterproofing material Hydromin), etc.).
Consumption per 1 m² varies between 0.45 and 0.8, depending on the base type.
The universal mastic is designed for all types of waterproofing work. After drying, it forms a coating with strong durability across a wide range of working temperatures. Before use, all surfaces must be cleaned of dust, dirt, and oil. The mastic should be well stirred before use. It is recommended to apply the mastic in 2 layers using a brush or trowel.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
BUTA Waterproofing Mastic (Rubber Based) 18L
choose a product
- Self-adhesive waterproofing tape 20x1000 cm - BUTYLSTRIP
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- Transparent polyurethane membrane - BALCONY WATER 10KG
- FOX MORTAR FC188 T 25kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Universal polyurethane membrane - ICOPER MULTIUSO 20KG ROSSO COPPO
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Two-component injection solution Foamjet T 20+24kg
- Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- Hydrostekloizol EKP - 4.5
- PVC membrane MAPEPLAN M 15 Broof T1/T3 1.5mm (2.10X20)
- ТПО мембрана MAPEPLAN TM 15 BROOF T1 (1,6x20)
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- Aerator 100mm/290mm PG (set)
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Coating waterproofing FOX WATERPROF FS100 4 kg
- FOX GROUT FC155 (R4) 25kg
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- PVC water outlet MAPEPLAN SQUARE WALL OUTLET, box of 10 pcs
- Hydrostekloizol EPP - 4.0
- waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
Work should be carried out at temperatures between -10°C and +40°C. At temperatures below +5°C, the mastic should be stored at room temperature for at least one day beforehand. Do not use near open flames. Work must be performed in rooms equipped with ventilation systems. Avoid contact with skin and eyes. Use indoors is not recommended. In case of skin contact, wash the mastic off with a solvent.