one-component injection solution 20 kg - Resfoam 1K-M
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Resfoam 1K-M is a one-component, ultra-fluid polyurethane injection mortar made of special additives and accelerant, prepared according to a formula... See more
Resfoam 1K-M is a one-component, ultra-fluid polyurethane injection mortar made of special additives and accelerant, prepared according to a formula developed in MAPEI research laboratories. It is used for waterproofing structures, soils and rock exposed to intensive water. The reaction time is adjustable. On contact with water, the resin forms a semi-rigid waterproof polyurethane foam. Due to its high elasticity, Resfoam 1K-M penetrates cracks up to one hundred microns wide and can seal them, even if they are prone to water leakage. After curing, after 40-80 seconds, depending on the temperature and the amount of accelerant added, Resfoam 1K-M provides complete waterproofing of the treated surface. Resfoam 1K-M complies with the requirements of EN 1504-9 and EN 15045.
See less
▪ Tunnels subject to water seepage through cracks.
▪ Wells or hydraulic structures where water seeps through working joints or cracks.
▪ Repair of cracks in dams, canals and barriers, even below the groundwater table.
▪ Sealing cracks in pits or in damp, water-saturated foundations.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
one-component injection solution 20 kg - Resfoam 1K-M
choose a product
- Epoxy Mortar FOX EPOMORTAR FC510
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- FOX FASTMORTAR FC233 25kg
- FOX GROUT FC155 (R4) 25kg
- Transparent polyurethane membrane - BALCONY WATER 10KG
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- Two-component injection solution Foamjet T 20+24kg
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- expanding cement mortar for injection works 20 kg - Stabilcem
- BUTA Waterproofing Mastic (Rubber Based) 18L
- Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- FOX GROUT FC155 (R4) 25kg
- Bitumen waterproofing Icopas 18kg
- expanding cement mortar for injection works 20 kg - Stabilcem
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Geotextile Dornit Eco 500 g/m2 (2*50)
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Hydroisol TKP 4.5 (1*10m2)
- ТПО мембрана MAPEPLAN TM 15 BROOF T1 (1,6x20)
- waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- IMPER BALANCE H 3,5 - EPP 3.5 kg / m2, 10 m2