BUTA Waterproofing Mastic (Rubber Based) 18L
- category: Coating waterproofing / Waterproofing
- Brands: BUTA project
Rubber-based mastic "Buta Project" is a ready multi-component material consisting of petroleum bitumen, crumb rubber, and organic solvent. The crumb r... See more
Country of manufacture: Azerbaijan
See less
Work should be carried out at temperatures between -10°C and +40°C. At temperatures below +5°C, the mastic should be stored at room temperature for at least one day beforehand. Do not use near open flames. Work must be performed in rooms equipped with ventilation systems. Avoid contact with skin and eyes. Use indoors is not recommended. In case of skin contact, wash the mastic off with a solvent.
The mastic "Buta Project" is used for waterproofing, roof installation and repair, anti-corrosion protection of concrete, metal, and other building structures, as well as for fastening various construction materials (fiberboard, plywood, glass, hydro glass insulation (waterproofing material Hydromin), etc.).
Consumption per 1 m² varies between 0.45 and 0.8, depending on the base type.
The universal mastic is designed for all types of waterproofing work. After drying, it forms a coating with strong durability across a wide range of working temperatures. Before use, all surfaces must be cleaned of dust, dirt, and oil. The mastic should be well stirred before use. It is recommended to apply the mastic in 2 layers using a brush or trowel.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
BUTA Waterproofing Mastic (Rubber Based) 18L
choose a product
- FOX GROUT FC155 (R4) 25kg
- Transparent polyurethane membrane - BALCONY WATER 10KG
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- Epoxy Mortar FOX EPOMORTAR FC510
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- Waterproofing material R-COMPOSIT 10 KG
- Bitumen waterproofing Icopas 18kg
- Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO
- FOX MORTAR FC188 T 25kg
- one-component injection solution 20 kg - Resfoam 1K-M
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Hydrostekloizol EPP - 4.0
- Polyurethane waterproofing Purtop Easy / 25 kg
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- Epoxy Mortar FOX EPOMORTAR FC510
- Hydroisol TPP 3.0 (1*10m2)
- Aerator with 70 mm diameter / height 270 mm
- Hydrostekloizol EPP - 3.5
- Hydroisol TKP 4.5 (1*10m2)
- PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- Geotextile Dornit Eco 300 g/m2 (2*50)
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- FOX MORTAR FC188 T 25kg
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
Work should be carried out at temperatures between -10°C and +40°C. At temperatures below +5°C, the mastic should be stored at room temperature for at least one day beforehand. Do not use near open flames. Work must be performed in rooms equipped with ventilation systems. Avoid contact with skin and eyes. Use indoors is not recommended. In case of skin contact, wash the mastic off with a solvent.