Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- category: Coating waterproofing / Waterproofing
S-COMPOSIT STANDART™ It is a single-component thin layer of polyurethane. It strengthens the concrete floor, protects it from mechanical and chemical... See more
S-COMPOSIT STANDART™ It is a single-component thin layer of polyurethane. It strengthens the concrete floor, protects it from mechanical and chemical influences. It is used as a paint and varnish on concrete, metal and wooden surfaces. The dried product has high elasticity, strength and resistance to mechanical and chemical agents. The material should be avoided from direct contact with sunlight, as it changes color and loses strength under the influence of sunlight. After drying, the color of the material is yellowish.
See less
S-COMPOSIT STANDART™ Designed to protect:
Walls, ceilings, concrete, wood and metal structures from mechanical and chemical influences;
To provide the surface with corrosion resistance, water resistance and protection against damage.
S-COMPOSIT STANDARD™ Advantages:
High wear resistance and resistance to chemical influences;
Dust removal from concrete surfaces;
Easy to use; Creates a glossy surface;
Can be applied from - 30°C to + 40°C;
Products offered
Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Polyurethane waterproofing Purtop Easy / 25 kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
mortar - FOX BASEMOR FC205 GRAY 25 kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Elastic waterproofing on acrylic base FOX WATERPROF® FS100 20kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Two-component injection solution Foamjet F 20+23kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- category: Coating waterproofing / Waterproofing
- Brands: ICOBIT
Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- category: Coating waterproofing / Waterproofing
waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
expanding cement mortar for injection works 20 kg - Stabilcem
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
BUTA Waterproofing Mastic (Rubber Based) 18L
- category: Coating waterproofing / Waterproofing
- Brands: BUTA project
mortar - FOX BASEMOR FC205 GRAY 25 kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Aerator with 70 mm diameter / height 270 mm
- category: Roll waterproofing / Waterproofing
Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
Universal polyurethane membrane - ICOPER MULTIUSO 20KG ROSSO COPPO
- category: Coating waterproofing / Waterproofing
- Brands: ICOBIT
expanding cement mortar for injection works 20 kg - Stabilcem
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Elastic waterproofing on acrylic base FOX WATERPROF® FS100 20kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Geotextile Dornit Eco 200 g/m2 (2*50)
- category: Membranes / Waterproofing
- Brands: TECHNOPLAST
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
choose a product
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- Waterproofing material R-COMPOSIT 10 KG
- Polyurethane waterproofing Purtop Easy / 25 kg
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- Elastic waterproofing on acrylic base FOX WATERPROF® FS100 20kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- Two-component injection solution Foamjet F 20+23kg
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- expanding cement mortar for injection works 20 kg - Stabilcem
- Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- BUTA Waterproofing Mastic (Rubber Based) 18L
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- Aerator with 70 mm diameter / height 270 mm
- Aerator 100mm/290mm PG (set)
- Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- Hydroisol TPP 3.5 (1*10m2)
- Universal polyurethane membrane - ICOPER MULTIUSO 20KG ROSSO COPPO
- expanding cement mortar for injection works 20 kg - Stabilcem
- Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- FOX FASTMORTAR FC233 25kg
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Hydrostekloizol EPP - 4.0
- Elastic waterproofing on acrylic base FOX WATERPROF® FS100 20kg
- Geotextile Dornit Eco 200 g/m2 (2*50)
- Hydroisol TKP 4.5 (1*10m2)
S-COMPOSIT STANDART™ Designed to protect:
Walls, ceilings, concrete, wood and metal structures from mechanical and chemical influences;
To provide the surface with corrosion resistance, water resistance and protection against damage.
S-COMPOSIT STANDARD™ Advantages:
High wear resistance and resistance to chemical influences;
Dust removal from concrete surfaces;
Easy to use; Creates a glossy surface;
Can be applied from - 30°C to + 40°C;