one-component injection solution 20 kg - Resfoam 1K-M
- category: Coating waterproofing
- Brands: MAPEI
Resfoam 1K-M is a one-component, ultra-fluid polyurethane injection mortar made of special additives and accelerant, prepared according to a formula... See more
Resfoam 1K-M is a one-component, ultra-fluid polyurethane injection mortar made of special additives and accelerant, prepared according to a formula developed in MAPEI research laboratories. It is used for waterproofing structures, soils and rock exposed to intensive water. The reaction time is adjustable. On contact with water, the resin forms a semi-rigid waterproof polyurethane foam. Due to its high elasticity, Resfoam 1K-M penetrates cracks up to one hundred microns wide and can seal them, even if they are prone to water leakage. After curing, after 40-80 seconds, depending on the temperature and the amount of accelerant added, Resfoam 1K-M provides complete waterproofing of the treated surface. Resfoam 1K-M complies with the requirements of EN 1504-9 and EN 15045.
See less
▪ Tunnels subject to water seepage through cracks.
▪ Wells or hydraulic structures where water seeps through working joints or cracks.
▪ Repair of cracks in dams, canals and barriers, even below the groundwater table.
▪ Sealing cracks in pits or in damp, water-saturated foundations.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
one-component injection solution 20 kg - Resfoam 1K-M
choose a product
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- expanding cement mortar for injection works 20 kg - Stabilcem
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO
- Bitumen waterproofing Plastimul / 20 kg
- Two-component injection solution Foamjet T 20+24kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- FOX MORTAR FC188 T 25kg
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- mortar - FOX BASEMOR FC205 GRAY 25 kg