Mastic rubber-bitumen Profimast (21.5 l / 18 kg)
- category: Coating waterproofing
- Brands: BITUMAST
The primer is a solution of high-quality petroleum products, namely a mixture of bitumen and specially selected organic additives, impregnated with sp... See more
The primer is a solution of high-quality petroleum products, namely a mixture of bitumen and specially selected organic additives, impregnated with specialized plasticizers.
See less
Used for priming concrete, wood and metal surfaces to ensure maximum adhesion of adhesive waterproofing materials or all types of soft tiles. Provides better adhesion of treated surfaces. Thoroughly mix the primer throughout. The surface to be treated must be dry, previously cleaned of dirt, fragile remnants of the old coating. It is applied with a brush, roller in 2-3 layers, depending on the surface, as well as by airless blowing. The primer penetrates the surface, impregnates and binds the material, providing a strong adhesion of waterproofing materials to the surface. In case of work at low temperatures, it is recommended to warm up the material to +15 degrees. Application is allowed up to -20 degrees. Store in a dry, protected from sunlight place at a temperature of -30 to +50 degrees. Warranty period of storage is 35 months.
Products offered
Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- category: Coating waterproofing
- Brands: FOX BAU
Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- category: Coating waterproofing
fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- category: Coating waterproofing
- Brands: MAPEI
High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- category: Coating waterproofing
- Brands: FOX BAU
Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- category: Coating waterproofing
- Brands: FOX BAU
Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- category: Coating waterproofing
- Brands: FOX BAU
Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- category: Coating waterproofing
- Brands: FOX BAU
Two-component primer - BALCONY WATER PRIMER (Comp A+B) 1KG
- category: Coating waterproofing
- Brands: ICOBIT
waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- category: Coating waterproofing
- Brands: MAPEI
Primer bituminous Profimast (21.5 l / 16 kg)
- category: Coating waterproofing
- Brands: BITUMAST
Two-component injection solution Foamjet T 20+24kg
- category: Coating waterproofing
- Brands: MAPEI
Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO
- category: Coating waterproofing
- Brands: ICOBIT
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Mastic rubber-bitumen Profimast (21.5 l / 18 kg)
choose a product
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- Waterproofing material R-COMPOSIT 10 KG
- Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- Epoxy Mortar FOX EPOMORTAR FC510
- Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- FOX GROUT FC155 (R4) 25kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- Two-component primer - BALCONY WATER PRIMER (Comp A+B) 1KG
- waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- Primer bituminous Profimast (21.5 l / 16 kg)
- Two-component injection solution Foamjet T 20+24kg
- Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO