IMPER GARANT Н - 4 kg / m2, EPP 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
It is used to make or repair new and old roofs while the building can be in service. It is a roofing waterproofing material. It is obtained by applyin... See more
It is used to make or repair new and old roofs while the building can be in service. It is a roofing waterproofing material. It is obtained by applying double-sided bitumen-polymer layers modified with mineral filler on a polyester base. Polyester base; modified; roll; with polymer modifier; mineral filler;
See less
Feature Name | measurement | Criterion | IMPERGARANT H | Test Methodology |
Weight | kg/m2 | ±5 %* | 4.0 | ГОСТ EN 1849-1-2011 |
Thickness** | mm | ±5 % | 2.8 | ГОСТ EN 1849-1-2011 |
Maximum Elongation: Width Length | n. | ± 200 *** | ГОСТ 31899-1-2011 (EN 12311 1:1999) | |
Loss of shrinkage | % | ±15 | ГОСТ EN 12039-2011 | |
Water retention 24h | % Mass weight | No more than | - | ГОСТ 2678-94 |
Watertightness when pressure is 10 kg/p | - | - | ГОСТ EN 1928-2011, Method А | |
Water resistance when pressure is 0.2 MPa, 24h | - | - | Resistant | ГОСТ 2678-94 |
Heat Resistance | оС | No more than | ГОСТ EN 1110-2011 |
- Reliability,
- long-term protection,
- quick installation;
- designed for European countries, so it better adapts to climate change in Georgia.
Products offered
Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PLASTOPER PG4W GREY Tkp 4.0 kg/m² (1x10 m)
- category: Waterproofing / Roll waterproofing
- Brands: RAVAGO
IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PLASTOPER PG3W Tpp 3.0 kg/m² (1x10 m)
- category: Waterproofing / Roll waterproofing
- Brands: RAVAGO
PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
BUTA Waterproofing Mastic (Rubber Based) 18L
- category: Coating waterproofing / Waterproofing
- Brands: BUTA project
Resin-polymer waterproofing FOX WATERPROF FS105 WHİTE 20kg
- category: Waterproofing
- Brands: FOX BAU
expanding cement mortar for injection works 20 kg - Stabilcem
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Elastic waterproofing on acrylic base FOX WATERPROF® FS100 20kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PVC membrane MAPEPLAN M 15 Broof T1/T3 1.5mm (2.10X20)
- category: Membranes / Waterproofing
- Brands: MAPEI
waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Geotextile Dornit Eco 200 g/m2 (2*50)
- category: Membranes / Waterproofing
- Brands: TECHNOPLAST
Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
IMPER BALANCE H 3,5 - EPP 3.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
IMPER GARANT Н - 4 kg / m2, EPP 10 m2
choose a product
- Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- Hydrostekloizol EPP - 3.5
- Hydroisol TPP 3.0 (1*10m2)
- PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- Hydroisol TKP 4.5 (1*10m2)
- Hydroisol TPP 3.5 (1*10m2)
- Hydroisol TKP 4.0 (1*10m2)
- Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- PLASTOPER PG4W GREY Tkp 4.0 kg/m² (1x10 m)
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- Hydrostekloizol EKP - 5.0
- PLASTOPER PG3W Tpp 3.0 kg/m² (1x10 m)
- PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- BUTA Waterproofing Mastic (Rubber Based) 18L
- Resin-polymer waterproofing FOX WATERPROF FS105 WHİTE 20kg
- expanding cement mortar for injection works 20 kg - Stabilcem
- Aerator 100mm/290mm PG (set)
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- FOX GROUT FC155 (R4) 25kg
- Elastic waterproofing on acrylic base FOX WATERPROF® FS100 20kg
- Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- PVC membrane MAPEPLAN M 15 Broof T1/T3 1.5mm (2.10X20)
- waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- Geotextile Dornit Eco 200 g/m2 (2*50)
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- IMPER BALANCE H 3,5 - EPP 3.5 kg / m2, 10 m2
- Hydrostekloizol EKP - 4.5
Feature Name | measurement | Criterion | IMPERGARANT H | Test Methodology |
Weight | kg/m2 | ±5 %* | 4.0 | ГОСТ EN 1849-1-2011 |
Thickness** | mm | ±5 % | 2.8 | ГОСТ EN 1849-1-2011 |
Maximum Elongation: Width Length | n. | ± 200 *** | ГОСТ 31899-1-2011 (EN 12311 1:1999) | |
Loss of shrinkage | % | ±15 | ГОСТ EN 12039-2011 | |
Water retention 24h | % Mass weight | No more than | - | ГОСТ 2678-94 |
Watertightness when pressure is 10 kg/p | - | - | ГОСТ EN 1928-2011, Method А | |
Water resistance when pressure is 0.2 MPa, 24h | - | - | Resistant | ГОСТ 2678-94 |
Heat Resistance | оС | No more than | ГОСТ EN 1110-2011 |