Two-component injection solution Foamjet T 20+24kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
High viscosity, ultra-fast curing injectable polyurethane mortar for consolidation and waterproofing of cast-in-place construction subject to heavy... See more
High viscosity, ultra-fast curing injectable polyurethane mortar for consolidation and waterproofing of cast-in-place construction subject to heavy water penetration.
Usage:
- In impermeable rock or earth trenches, dams, mines or tunnels where there is heavy water penetration.
- Even with constant water pressure of the waterproofing deposit.
Consumption:
- In the absence of water: approx. 1.1 kg of mixture (part A + part B) per liter of cavity;
- In the presence of water: approx. 0.3 kg of mixture (part A + part B) per liter of cavity.
Packaging:
44 kg unit:
- Component A = 20 kg.
- Component B = 24 kg.
Foamjet F complies with the requirements of EN 1504-9 and EN 1504-5.
See less
Product: Component A Component B
20 kg 23 kg
Color: light yellow, dark brown
Consistency: Liquid fluid
Density (g/mL): 1.10 ± 0.03 at +23°C 1.24 ± 0.04 at +23°C
Viscosity: 310 ± 62 at +23°C 290 ± 58 at +23°C
Curing time: 3-5 minutes depending on environment and temperature.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Two-component injection solution Foamjet T 20+24kg
choose a product
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- FOX MORTAR FC188 T 25kg
- expanding cement mortar for injection works 20 kg - Stabilcem
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- one-component injection solution 20 kg - Resfoam 1K-M
- Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- Polyurethane waterproofing Purtop Easy / 25 kg
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Transparent polyurethane membrane - BALCONY WATER 10KG
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- BUTA Waterproofing Mastic (Rubber Based) 18L
- Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- Hydrostekloizol EKP - 5.0
- Geotextile Dornit Eco 400 g/m2 (2*50)
- Unreinforced PVC membrane Mapeplan D15 (1×20m)
- Polyurethane waterproofing Purtop Easy / 25 kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- Bitumen waterproofing Icopas 18kg
- Hydroisol TKP 4.0 (1*10m2)
Product: Component A Component B
20 kg 23 kg
Color: light yellow, dark brown
Consistency: Liquid fluid
Density (g/mL): 1.10 ± 0.03 at +23°C 1.24 ± 0.04 at +23°C
Viscosity: 310 ± 62 at +23°C 290 ± 58 at +23°C
Curing time: 3-5 minutes depending on environment and temperature.