BUTA Waterproofing Mastic (Rubber Based) 18L
- category: Coating waterproofing / Waterproofing
- Brands: BUTA project
Rubber-based mastic "Buta Project" is a ready multi-component material consisting of petroleum bitumen, crumb rubber, and organic solvent. The crumb r... See more
Country of manufacture: Azerbaijan
See less
Work should be carried out at temperatures between -10°C and +40°C. At temperatures below +5°C, the mastic should be stored at room temperature for at least one day beforehand. Do not use near open flames. Work must be performed in rooms equipped with ventilation systems. Avoid contact with skin and eyes. Use indoors is not recommended. In case of skin contact, wash the mastic off with a solvent.
The mastic "Buta Project" is used for waterproofing, roof installation and repair, anti-corrosion protection of concrete, metal, and other building structures, as well as for fastening various construction materials (fiberboard, plywood, glass, hydro glass insulation (waterproofing material Hydromin), etc.).
Consumption per 1 m² varies between 0.45 and 0.8, depending on the base type.
The universal mastic is designed for all types of waterproofing work. After drying, it forms a coating with strong durability across a wide range of working temperatures. Before use, all surfaces must be cleaned of dust, dirt, and oil. The mastic should be well stirred before use. It is recommended to apply the mastic in 2 layers using a brush or trowel.
Products offered
fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Self-adhesive waterproofing tape 20x1000 cm - BUTYLSTRIP
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Coating waterproofing FOX WATERPROF FS100 4 kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Connecting insulation tape FOX MONOTAPE 120/70 mm 50 m
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
one-component injection solution 20 kg - Resfoam 1K-M
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- category: Coating waterproofing / Waterproofing
Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Unreinforced PVC membrane Mapeplan D15 (1×20m)
- category: Membranes / Waterproofing
- Brands: MAPEI
mortar - FOX BASEMOR FC205 GRAY 25 kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Geotextile Dornit Eco 500 g/m2 (2*50)
- category: Membranes / Waterproofing
- Brands: TECHNOPLAST
Two-component injection solution Foamjet T 20+24kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- category: Coating waterproofing / Waterproofing
Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Two-component injection solution Foamjet F 20+23kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Cement-based waterproofing – FOX MULTISEAL FS367 25kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
IMPER GARANT Н - 4 kg / m2, EPP 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
BUTA Waterproofing Mastic (Rubber Based) 18L
choose a product
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- Self-adhesive waterproofing tape 20x1000 cm - BUTYLSTRIP
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- Waterproofing material R-COMPOSIT 10 KG
- Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- Coating waterproofing FOX WATERPROF FS100 4 kg
- FOX FASTMORTAR FC233 25kg
- Connecting insulation tape FOX MONOTAPE 120/70 mm 50 m
- one-component injection solution 20 kg - Resfoam 1K-M
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- Unreinforced PVC membrane Mapeplan D15 (1×20m)
- Hydrostekloizol EPP - 4.0
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- Geotextile Dornit Eco 500 g/m2 (2*50)
- Two-component injection solution Foamjet T 20+24kg
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- Waterproofing material R-COMPOSIT 10 KG
- Two-component injection solution Foamjet F 20+23kg
- Cement-based waterproofing – FOX MULTISEAL FS367 25kg
- Aerator 100mm/290mm PG (set)
- IMPER GARANT Н - 4 kg / m2, EPP 10 m2
- PVC membrane corner MAPEPLAN EXTERNAL WAVY CORNER PLUS
Work should be carried out at temperatures between -10°C and +40°C. At temperatures below +5°C, the mastic should be stored at room temperature for at least one day beforehand. Do not use near open flames. Work must be performed in rooms equipped with ventilation systems. Avoid contact with skin and eyes. Use indoors is not recommended. In case of skin contact, wash the mastic off with a solvent.