Waterproofing material R-COMPOSIT 10 KG
- category: Coating waterproofing / Waterproofing
R-COMPOSIT provides effective protection of roofs from atmospheric influences, precipitation, significantly reduces the impact of solar... See more
R-COMPOSIT provides effective protection of roofs from atmospheric influences, precipitation, significantly reduces the impact of solar radiation and other environmental factors on the roof. R-COMPOSIT is used as a primer. Applied in 2 layers: the first layer is diluted in water in the following proportion: 1 part R-COMPOSIT, 5 parts water; the second layer is 1:1. Drying requires 2 hours at an ambient temperature of +20°C and 70% humidity.
See less
R-COMPOSIT is used wherever bitumen or similar materials are recommended. After drying, it forms a white glossy surface that is waterproof and resistant to any weather conditions. The material is characterized by excellent adhesion to any surface (concrete, metal, ceramic tile, plaster, brick, and others...); unlike other waterproofing materials, it has vapor permeability, allows steam to pass through its surface, and extends its service life; has low thermal conductivity and solar reflection (the color of the coating reduces solar radiation); resistant to chemicals, excellently withstands frost (-30°C) and high temperatures (+100°C); is a non-flammable material, does not contain organic additives and therefore can be used in fire-hazardous places; the material can be applied with a roller and brush, and can also be applied with a high-pressure compressor; does not require additional materials and can be used as a finishing layer.
R-COMPOSIT is a unique liquid polymer waterproofing material. The material is designed for the following objects: roofs that have complex geometric contours; where the use of bitumen membranes is difficult; roofs and surfaces that are loaded with engineering utility equipment and have complex geometric shapes and require waterproofing; all areas where there is a risk of water leakage.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Waterproofing material R-COMPOSIT 10 KG
choose a product
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Bitumen waterproofing Icopas 18kg
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- expanding cement mortar for injection works 20 kg - Stabilcem
- Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- Two-component injection solution Foamjet T 20+24kg
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Connecting insulation tape FOX MONOTAPE 120/70 mm 50 m
- Self-adhesive waterproofing tape 20x1000 cm - BUTYLSTRIP
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- IMPER BALANCE H 3,5 - EPP 3.5 kg / m2, 10 m2
- PLASTOPER PG3W Tpp 3.0 kg/m² (1x10 m)
- IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO
- Hydrostekloizol EPP - 3.5
- ТПО мембрана MAPEPLAN TM 15 BROOF T1 (1,6x20)
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- Geomat – GEO GM-4 anti-erosion geomat for construction purposes (60m² per piece)
- PLASTOPER PG4W GREY Tkp 4.0 kg/m² (1x10 m)
- Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- PVC membrane corner MAPEPLAN EXTERNAL WAVY CORNER PLUS
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg