one-component injection solution 20 kg - Resfoam 1K-M
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Resfoam 1K-M is a one-component, ultra-fluid polyurethane injection mortar made of special additives and accelerant, prepared according to a formula... See more
Resfoam 1K-M is a one-component, ultra-fluid polyurethane injection mortar made of special additives and accelerant, prepared according to a formula developed in MAPEI research laboratories. It is used for waterproofing structures, soils and rock exposed to intensive water. The reaction time is adjustable. On contact with water, the resin forms a semi-rigid waterproof polyurethane foam. Due to its high elasticity, Resfoam 1K-M penetrates cracks up to one hundred microns wide and can seal them, even if they are prone to water leakage. After curing, after 40-80 seconds, depending on the temperature and the amount of accelerant added, Resfoam 1K-M provides complete waterproofing of the treated surface. Resfoam 1K-M complies with the requirements of EN 1504-9 and EN 15045.
See less
▪ Tunnels subject to water seepage through cracks.
▪ Wells or hydraulic structures where water seeps through working joints or cracks.
▪ Repair of cracks in dams, canals and barriers, even below the groundwater table.
▪ Sealing cracks in pits or in damp, water-saturated foundations.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
one-component injection solution 20 kg - Resfoam 1K-M
choose a product
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- Universal polyurethane membrane - ICOPER MULTIUSO 20KG ROSSO COPPO
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Coating waterproofing FOX WATERPROF FS100 4 kg
- Bitumen waterproofing Icopas 18kg
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- Elastic waterproofing on acrylic base FOX WATERPROF® FS100 20kg
- Two-component injection solution Foamjet F 20+23kg
- Cement-based waterproofing – FOX MULTISEAL FS367 25kg
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- Geotextile Dornit Eco 150 g/m2 (2*50)
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- Geotextile Dornit Eco 500 g/m2 (2*50)
- Hydroisol TPP 3.5 (1*10m2)
- expanding cement mortar for injection works 20 kg - Stabilcem
- Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- Hydroisol TKP 4.0 (1*10m2)
- Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- ТПО мембрана MAPEPLAN TM 15 BROOF T1 (1,6x20)
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- PVC aerator Mapeplan Aerator H.200 with cover
- Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus