one-component injection solution 20 kg - Resfoam 1K-M
- category: Coating waterproofing
- Brands: MAPEI
Resfoam 1K-M is a one-component, ultra-fluid polyurethane injection mortar made of special additives and accelerant, prepared according to a formula... See more
Resfoam 1K-M is a one-component, ultra-fluid polyurethane injection mortar made of special additives and accelerant, prepared according to a formula developed in MAPEI research laboratories. It is used for waterproofing structures, soils and rock exposed to intensive water. The reaction time is adjustable. On contact with water, the resin forms a semi-rigid waterproof polyurethane foam. Due to its high elasticity, Resfoam 1K-M penetrates cracks up to one hundred microns wide and can seal them, even if they are prone to water leakage. After curing, after 40-80 seconds, depending on the temperature and the amount of accelerant added, Resfoam 1K-M provides complete waterproofing of the treated surface. Resfoam 1K-M complies with the requirements of EN 1504-9 and EN 15045.
See less
▪ Tunnels subject to water seepage through cracks.
▪ Wells or hydraulic structures where water seeps through working joints or cracks.
▪ Repair of cracks in dams, canals and barriers, even below the groundwater table.
▪ Sealing cracks in pits or in damp, water-saturated foundations.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
one-component injection solution 20 kg - Resfoam 1K-M
choose a product
- Bitumen primer IDROPRIMER 20 liters
- BUTA Bitumen primer 18 l (16 kg)
- Bitumen waterproofing Plastimul / 20 kg
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Bitumen waterproofing Icopas 18kg
- Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- Bitumen primer on solvent base POLYCOLL 25kg
- Insulation tape FOX COMBOTAPE 250/1 mm; 20 m
- FOX GROUT FC155 (R4) 25kg
- Two-component injection solution Foamjet T 20+24kg
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG