Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- category: Coating waterproofing
S-COMPOSIT STANDART™ It is a single-component thin layer of polyurethane. It strengthens the concrete floor, protects it from mechanical and chemical... See more
S-COMPOSIT STANDART™ It is a single-component thin layer of polyurethane. It strengthens the concrete floor, protects it from mechanical and chemical influences. It is used as a paint and varnish on concrete, metal and wooden surfaces. The dried product has high elasticity, strength and resistance to mechanical and chemical agents. The material should be avoided from direct contact with sunlight, as it changes color and loses strength under the influence of sunlight. After drying, the color of the material is yellowish.
See less
S-COMPOSIT STANDART™ Designed to protect:
Walls, ceilings, concrete, wood and metal structures from mechanical and chemical influences;
To provide the surface with corrosion resistance, water resistance and protection against damage.
S-COMPOSIT STANDARD™ Advantages:
High wear resistance and resistance to chemical influences;
Dust removal from concrete surfaces;
Easy to use; Creates a glossy surface;
Can be applied from - 30°C to + 40°C;
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
choose a product
- one-component injection solution 20 kg - Resfoam 1K-M
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Coating waterproofing FOX WATERPROF FS100 4 kg
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- expanding cement mortar for injection works 20 kg - Stabilcem
- Polyurethane waterproofing Purtop Easy / 25 kg
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- Self-adhesive waterproofing tape 20x1000 cm - BUTYLSTRIP
- Cement-based waterproofing – FOX MULTISEAL FS367 25kg
- Liquid Extra Strength Membrane - KEEP DRY 18KG ROSSO MARTE
- Transparent polyurethane membrane - BALCONY WATER 10KG
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
S-COMPOSIT STANDART™ Designed to protect:
Walls, ceilings, concrete, wood and metal structures from mechanical and chemical influences;
To provide the surface with corrosion resistance, water resistance and protection against damage.
S-COMPOSIT STANDARD™ Advantages:
High wear resistance and resistance to chemical influences;
Dust removal from concrete surfaces;
Easy to use; Creates a glossy surface;
Can be applied from - 30°C to + 40°C;