Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- category: Coating waterproofing / Waterproofing
S-COMPOSIT STANDART™ It is a single-component thin layer of polyurethane. It strengthens the concrete floor, protects it from mechanical and chemical... See more
S-COMPOSIT STANDART™ It is a single-component thin layer of polyurethane. It strengthens the concrete floor, protects it from mechanical and chemical influences. It is used as a paint and varnish on concrete, metal and wooden surfaces. The dried product has high elasticity, strength and resistance to mechanical and chemical agents. The material should be avoided from direct contact with sunlight, as it changes color and loses strength under the influence of sunlight. After drying, the color of the material is yellowish.
See less
S-COMPOSIT STANDART™ Designed to protect:
Walls, ceilings, concrete, wood and metal structures from mechanical and chemical influences;
To provide the surface with corrosion resistance, water resistance and protection against damage.
S-COMPOSIT STANDARD™ Advantages:
High wear resistance and resistance to chemical influences;
Dust removal from concrete surfaces;
Easy to use; Creates a glossy surface;
Can be applied from - 30°C to + 40°C;
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
choose a product
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- Two-component injection solution Foamjet F 20+23kg
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- Two-component injection solution Foamjet T 20+24kg
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- one-component injection solution 20 kg - Resfoam 1K-M
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Epoxy Mortar FOX EPOMORTAR FC510
- Self-adhesive waterproofing tape 20x1000 cm - BUTYLSTRIP
- FOX MORTAR FC188 T 25kg
- Bitumen waterproofing Icopas 18kg
- Connecting insulation tape FOX MONOTAPE 120/70 mm 50 m
- one-component injection solution 20 kg - Resfoam 1K-M
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- Geomat – GEO GM-4 anti-erosion geomat for construction purposes (60m² per piece)
- PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- expanding cement mortar for injection works 20 kg - Stabilcem
- Self-adhesive waterproofing tape 20x1000 cm - BUTYLSTRIP
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- IMPER BALANCE H 3,5 - EPP 3.5 kg / m2, 10 m2
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- Two-component injection solution Foamjet F 20+23kg
- Waterproofing material R-COMPOSIT 10 KG
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Unreinforced PVC membrane Mapeplan D15 (1×20m)
- Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
S-COMPOSIT STANDART™ Designed to protect:
Walls, ceilings, concrete, wood and metal structures from mechanical and chemical influences;
To provide the surface with corrosion resistance, water resistance and protection against damage.
S-COMPOSIT STANDARD™ Advantages:
High wear resistance and resistance to chemical influences;
Dust removal from concrete surfaces;
Easy to use; Creates a glossy surface;
Can be applied from - 30°C to + 40°C;