bitumen primer - ICopal
- category: Coating waterproofing / პრაიმერი
- Brands: ICOPAL
Bitumen Primer Icopal consists of high quality petroleum bitumen and organic solvents. The product is ready for use.
Bitumen Primer Icopal consists of high quality petroleum bitumen and organic solvents. The product is ready for use.
See less
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Average flow rate, l/m2 |
0,3 |
|
Drying time at +20°С, hr, not more |
4 |
|
non-volatile matter content, %, not less |
35 |
|
relative viscosity, seconds, not more |
30 |
|
Dry residue melting point, °С, not less |
70 |
- Low flow rate;
- Short drying period.
APPLICATION AREA
Concrete, sand-cement and metal surface priming before application of welded and self-adhesive roofing and waterproofing rolled bitumen materials, and before application of mastics
APPLICATION METHOD
Application of bitumen primer is carried out with a brush, a paint roller or by spraying at the ambient temperature that varies from -5°С to +45°С. At the temperature that is lower than +5ºС, primer should be conditioned in a warm space for 24 hours at the temperature of no lower than +15ºС.
Before use, the whole volume of primer of the bitumen should be thoroughly mixed. If necessary, it can be diluted with white spirit, kerosene oil or solvent petroleum spirit. The working surface should be dry, pre-cleaned from dust, dirt, snow and ice.
Application of rolled materials and mastics is allowed only after primer is fully dried. It is important to wear gloves when working with the materials. Contact of the materials with eyes and skin is to be avoided.
Products offered
ICOPOX 4 - 20 Kg (A+B) - two-component, colored, self-leveling polyurethane coating.
- category: Coating waterproofing
- Brands: ICOBIT
ICOPER HP 20KG liquid fibrous membrane
- category: Coating waterproofing
- Brands: ICOBIT
Resfoam 1K-M one-component injection solution 20 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- category: Coating waterproofing
- Brands: FOX BAU
ICOARM TNT BAND 130 g/m2 0,20x50m is a polyester reinforcing tape.
- category: Coating waterproofing
- Brands: ICOBIT
ICOPOX 4 - 20 Kg (A+B) - two-component, colored, self-leveling polyurethane coating.
- category: Coating waterproofing
- Brands: ICOBIT
ICOPER HP 20KG liquid fibrous membrane
- category: Coating waterproofing
- Brands: ICOBIT
Resfoam 1K-M one-component injection solution 20 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- category: Coating waterproofing
- Brands: FOX BAU
ICOARM TNT BAND 130 g/m2 0,20x50m is a polyester reinforcing tape.
- category: Coating waterproofing
- Brands: ICOBIT
ICOPOX 4 - 20 Kg (A+B) - two-component, colored, self-leveling polyurethane coating.
- category: Coating waterproofing
- Brands: ICOBIT
ICOPER HP 20KG liquid fibrous membrane
- category: Coating waterproofing
- Brands: ICOBIT
Resfoam 1K-M one-component injection solution 20 kg
- category: Waterproofing / Coating waterproofing
- Brands: MAPEI
Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- category: Coating waterproofing
- Brands: FOX BAU
ICOARM TNT BAND 130 g/m2 0,20x50m is a polyester reinforcing tape.
- category: Coating waterproofing
- Brands: ICOBIT
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 300, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
bitumen primer - ICopal
choose a product
- icoproof s
- CasaComfort -2.5-14l.
- ICOPOX 4 - 20 Kg (A+B) - two-component, colored, self-leveling polyurethane coating.
- ICOPER HP 20KG liquid fibrous membrane
- Resfoam 1K-M one-component injection solution 20 kg
- BUTA Waterproofing Mastic (Rubber Based) 18L
- FOX MONOTAPE 120/70 mm 50kg
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- icopool d/ep
- Waterproofing mastic Profimast (21.5 l/18 kg)
- ICODIL SX - universal solvent
- ICOARM TNT BAND 130 g/m2 0,20x50m is a polyester reinforcing tape.
- FOX MULTISEAL STANDART Grey 27kg
- FOX GROUT FC155 (R4) 25kg
- Primer bituminous Profimast (21.5 l / 16 kg)
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Average flow rate, l/m2 |
0,3 |
|
Drying time at +20°С, hr, not more |
4 |
|
non-volatile matter content, %, not less |
35 |
|
relative viscosity, seconds, not more |
30 |
|
Dry residue melting point, °С, not less |
70 |
