bitumen primer - ICopal
- category: Coating waterproofing / პრაიმერი
- Brands: ICOPAL
Bitumen Primer Icopal consists of high quality petroleum bitumen and organic solvents. The product is ready for use.
Bitumen Primer Icopal consists of high quality petroleum bitumen and organic solvents. The product is ready for use.
See less
- Specifications
- Advantages
- Application area
PARAMETER ITEM, MEASURE UNIT |
VALUE |
Average flow rate, l/m2 |
0,3 |
Drying time at +20°С, hr, not more |
4 |
non-volatile matter content, %, not less |
35 |
relative viscosity, seconds, not more |
30 |
Dry residue melting point, °С, not less |
70 |
- Low flow rate;
- Short drying period.
APPLICATION AREA
Concrete, sand-cement and metal surface priming before application of welded and self-adhesive roofing and waterproofing rolled bitumen materials, and before application of mastics
APPLICATION METHOD
Application of bitumen primer is carried out with a brush, a paint roller or by spraying at the ambient temperature that varies from -5°С to +45°С. At the temperature that is lower than +5ºС, primer should be conditioned in a warm space for 24 hours at the temperature of no lower than +15ºС.
Before use, the whole volume of primer of the bitumen should be thoroughly mixed. If necessary, it can be diluted with white spirit, kerosene oil or solvent petroleum spirit. The working surface should be dry, pre-cleaned from dust, dirt, snow and ice.
Application of rolled materials and mastics is allowed only after primer is fully dried. It is important to wear gloves when working with the materials. Contact of the materials with eyes and skin is to be avoided.
Products offered
BALCONY WATER PRIMER (Comp A+B) 1KG - Two-component polyurethane primer
- category: Coating waterproofing
- Brands: ICOBIT
KEEP DRY 18KG ROSSO MARTE - Liquid Extra Strength Membrane
- category: Coating waterproofing
- Brands: ICOBIT
Bitumen waterproofing Plastimul / 20 kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
FOX UNIPRIMER FL555 20 kg - Universal primer
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
Primer bituminous (Primer) Profimast (5 l / 4.5 kg)
- category: Coating waterproofing
BUTYLSTRIP Self-adhesive waterproofing tape 5x1000 cm.
- category: Coating waterproofing
- Brands: MAPEI
Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- category: Coating waterproofing
FOX CERAFLEX FX114 GREY 25 kg - High-strength cement adhesive
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
ბიტუმის პრაიმერი (ეკონომ) (21,5 ლ / 16 კგ)
- category: Coating waterproofing
- Brands: BITUMAST
BALCONY WATER PRIMER (Comp A+B) 1KG - Two-component polyurethane primer
- category: Coating waterproofing
- Brands: ICOBIT
KEEP DRY 18KG ROSSO MARTE - Liquid Extra Strength Membrane
- category: Coating waterproofing
- Brands: ICOBIT
Bitumen waterproofing Plastimul / 20 kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
FOX UNIPRIMER FL555 20 kg - Universal primer
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
Primer bituminous (Primer) Profimast (5 l / 4.5 kg)
- category: Coating waterproofing
BUTYLSTRIP Self-adhesive waterproofing tape 5x1000 cm.
- category: Coating waterproofing
- Brands: MAPEI
Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- category: Coating waterproofing
FOX CERAFLEX FX114 GREY 25 kg - High-strength cement adhesive
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
ბიტუმის პრაიმერი (ეკონომ) (21,5 ლ / 16 კგ)
- category: Coating waterproofing
- Brands: BITUMAST
BALCONY WATER PRIMER (Comp A+B) 1KG - Two-component polyurethane primer
- category: Coating waterproofing
- Brands: ICOBIT
KEEP DRY 18KG ROSSO MARTE - Liquid Extra Strength Membrane
- category: Coating waterproofing
- Brands: ICOBIT
Bitumen waterproofing Plastimul / 20 kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
FOX UNIPRIMER FL555 20 kg - Universal primer
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
Primer bituminous (Primer) Profimast (5 l / 4.5 kg)
- category: Coating waterproofing
BUTYLSTRIP Self-adhesive waterproofing tape 5x1000 cm.
- category: Coating waterproofing
- Brands: MAPEI
Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- category: Coating waterproofing
FOX CERAFLEX FX114 GREY 25 kg - High-strength cement adhesive
- category: Waterproofing / Coating waterproofing
- Brands: FOX BAU
ბიტუმის პრაიმერი (ეკონომ) (21,5 ლ / 16 კგ)
- category: Coating waterproofing
- Brands: BITUMAST
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 300, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison

bitumen primer - ICopal
choose a product
- BALCONY WATER PRIMER (Comp A+B) 1KG - Two-component polyurethane primer
- icopool d/ep
- KEEP DRY 18KG ROSSO MARTE - Liquid Extra Strength Membrane
- FOX MULTISEAL FS367 25kg
- icoproof
- Bitumen waterproofing Plastimul / 20 kg
- FOX UNIPRIMER FL555 20 kg - Universal primer
- BUTA Waterproofing Mastic (Rubber Based) 18L
- Primer bituminous (Primer) Profimast (5 l / 4.5 kg)
- POLYSINT grey kg.20
- BUTYLSTRIP Self-adhesive waterproofing tape 5x1000 cm.
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- FOX CERAFLEX FX114 GREY 25 kg - High-strength cement adhesive
- WEBER DRY 706 32
- ბიტუმის პრაიმერი (ეკონომ) (21,5 ლ / 16 კგ)
PARAMETER ITEM, MEASURE UNIT |
VALUE |
Average flow rate, l/m2 |
0,3 |
Drying time at +20°С, hr, not more |
4 |
non-volatile matter content, %, not less |
35 |
relative viscosity, seconds, not more |
30 |
Dry residue melting point, °С, not less |
70 |