Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
It is used to make or repair new and old roofs while the building can be in service. It is a roofing waterproofing material. It is obtained by applyin... See more
It is used to make or repair new and old roofs while the building can be in service. It is a roofing waterproofing material. It is obtained by applying double-sided bitumen-polymer layers modified with mineral filler on a polyester base. Polyester base; modified; roll; with polymer modifier; mineral filler;
See less
Feature Name | measurement | Criterion | IMPER BALANCE B (T) | Test Methodology |
Weight | kg/m2 | ±5 %* | 4.5 | ГОСТ EN 1849-1-2011 |
Thickness** | mm | ±5 % | ГОСТ EN 1849-1-2011 | |
Maximum Elongation: Width Length | n. | ± 200 *** | 1000 1000 | ГОСТ 31899-1-2011 (EN 12311 1:1999) |
Loss of shrinkage | % | ±15 | - | ГОСТ EN 12039-2011 |
Water retention 24h | % Mass weight | No more than | 1 | ГОСТ 2678-94 |
Watertightness when pressure is 10 kg/p | - | - | ГОСТ EN 1928-2011, Method А | |
Water resistance when pressure is 0.2 MPa, 24h | - | - | Resistant | ГОСТ 2678-94 |
Heat Resistance | оС | No more than | +100 | ГОСТ EN 1110-2011 |
- Reliability,
- long-term protection,
- quick installation;
- designed for European countries, so it better adapts to climate change in Georgia.
Products offered
PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PLASTOPER PG4W GREY Tkp 4.0 kg/m² (1x10 m)
- category: Waterproofing / Roll waterproofing
- Brands: RAVAGO
Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
expanding cement mortar for injection works 20 kg - Stabilcem
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Geomat – GEO GM-4 anti-erosion geomat for construction purposes (60m² per piece)
- category: Membranes / Waterproofing
- Brands: FOX BAU
Geotextile Dornit Eco 500 g/m2 (2*50)
- category: Membranes / Waterproofing
- Brands: TECHNOPLAST
PLASTOPER PG3W Tpp 3.0 kg/m² (1x10 m)
- category: Waterproofing / Roll waterproofing
- Brands: RAVAGO
Two-component injection solution Foamjet T 20+24kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
PVC membrane MAPEPLAN M 15 Broof T1/T3 1.5mm (2.10X20)
- category: Membranes / Waterproofing
- Brands: MAPEI
Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
Geotextile Dornit Eco 400 g/m2 (2*50)
- category: Membranes / Waterproofing
- Brands: TECHNOPLAST
one-component injection solution 20 kg - Resfoam 1K-M
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Connecting insulation tape FOX MONOTAPE 120/70 mm 50 m
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- category: Coating waterproofing / Waterproofing
- Brands: ICOBIT
Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
choose a product
- PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- Hydrostekloizol EKP - 5.0
- Hydroisol TPP 3.5 (1*10m2)
- Hydrostekloizol EPP - 3.5
- PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- PLASTOPER PG4W GREY Tkp 4.0 kg/m² (1x10 m)
- Hydrostekloizol EKP - 4.5
- Hydroisol TKP 4.0 (1*10m2)
- Aerator 100mm/290mm PG (set)
- Hydrostekloizol EPP - 4.0
- Hydroisol TPP 3.0 (1*10m2)
- Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- expanding cement mortar for injection works 20 kg - Stabilcem
- Geomat – GEO GM-4 anti-erosion geomat for construction purposes (60m² per piece)
- Geotextile Dornit Eco 500 g/m2 (2*50)
- PLASTOPER PG3W Tpp 3.0 kg/m² (1x10 m)
- Two-component injection solution Foamjet T 20+24kg
- PVC membrane MAPEPLAN M 15 Broof T1/T3 1.5mm (2.10X20)
- Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- Hydrostekloizol EPP - 3.5
- Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- Geotextile Dornit Eco 400 g/m2 (2*50)
- one-component injection solution 20 kg - Resfoam 1K-M
- Connecting insulation tape FOX MONOTAPE 120/70 mm 50 m
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
Feature Name | measurement | Criterion | IMPER BALANCE B (T) | Test Methodology |
Weight | kg/m2 | ±5 %* | 4.5 | ГОСТ EN 1849-1-2011 |
Thickness** | mm | ±5 % | ГОСТ EN 1849-1-2011 | |
Maximum Elongation: Width Length | n. | ± 200 *** | 1000 1000 | ГОСТ 31899-1-2011 (EN 12311 1:1999) |
Loss of shrinkage | % | ±15 | - | ГОСТ EN 12039-2011 |
Water retention 24h | % Mass weight | No more than | 1 | ГОСТ 2678-94 |
Watertightness when pressure is 10 kg/p | - | - | ГОСТ EN 1928-2011, Method А | |
Water resistance when pressure is 0.2 MPa, 24h | - | - | Resistant | ГОСТ 2678-94 |
Heat Resistance | оС | No more than | +100 | ГОСТ EN 1110-2011 |