Hydroisol TPP 3.0 (1*10m2)
- category: Roll waterproofing / Waterproofing
- Brands: KRZ
Hydroisol is a waterproofing and covering roll material based on glass (Fibreglass fleece, fibreglass fabric, polyester). Fire safety indicators, flam... See more
Hydroisol is a waterproofing and covering roll material based on glass (Fibreglass fleece, fibreglass fabric, polyester). Fire safety indicators, flammability group G4 according to GOST 30244; ignition group B3 according to GOST 30402; flame propagation group RP4 according to GOST 30444;
See less
Indicator | Value |
Base types | X - Glass canvas T - glass fabric Э - Polyester |
Coating type | К - Coarse-grained dusting П - Dust-like dusting or polyethylene film |
Decoding example "ХКП" | Base - Glass canvas (Х) Top coating - coarse-grained (К) Bottom coating - dust-like dusting or polymer film (П) |
Technical characteristics: | Technical characteristics: | ||
Indicator | Value | Indicator | Value |
Weight of 1 m2 of material, within limits. ХКП/ТКП/ЭКП ХПП/ТПП/ЭПП | 3.5 - 7.0 kg 1.5 - 4.0 kg | Weight of 1 m2 of material, within limits. | 3.5 - 7.0 kg 1,5 - 4,0 კგ |
Heat resistance for 2 hours | 80°С | ХКП/ТКП/ЭКП | 1.5 - 4.0 kg |
Elongation on a round bar with a radius of R = 25.0 ± 0.2 mm (there should be no cracks on the surface of the sample) | 0°С | ХПП/ТПП/ЭПП | 80°С |
Tearing strength at break - on glass canvas - on glass fabric - on polyester | 450 N 550 N 500 N | Heat resistance for 2 hours | 0°С |
Water absorption in 24 hours | No more than 1.0% | Elongation on a round bar with a radius of R = 25.0 ± 0.2 mm | 450 N |
Loss of sand dusting (with coarse-grained dusting) | No more than 15% | (there should be no cracks on the surface of the sample) | 550 N |
Logistics data | |
Pallet length/width | 1,2/1,0 m. |
Number of rolls | From 20 to 42 rolls (depending on the weight of 1 m2 of material) |
(for top layer materials) | From 20 to 42 rolls (depending on the weight of 1 m2 of material) |
The hydroisol is applied to the prepared surface by gluing - with use of fusing, by gluing to a loosely laid material through fusing. For melting, gas or other fuel burners are used. The coating can be arranged at any time of the year, except for snowy and rainy weather.
Products offered
Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
IMPER BALANCE H 3,5 - EPP 3.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
IMPER GARANT Н - 4 kg / m2, EPP 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PLASTOPER PG4W GREY Tkp 4.0 kg/m² (1x10 m)
- category: Waterproofing / Roll waterproofing
- Brands: RAVAGO
PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
Polyurethane waterproofing Purtop Easy / 25 kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
Two-component injection solution Foamjet F 20+23kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Geotextile Dornit Eco 400 g/m2 (2*50)
- category: Membranes / Waterproofing
- Brands: TECHNOPLAST
one-component injection solution 20 kg - Resfoam 1K-M
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- category: Coating waterproofing / Waterproofing
High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Hydroisol TPP 3.0 (1*10m2)
choose a product
- Aerator 100mm/290mm PG (set)
- Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- Hydroisol TKP 4.0 (1*10m2)
- PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- IMPER BALANCE H 3,5 - EPP 3.5 kg / m2, 10 m2
- Hydrostekloizol EKP - 4.5
- Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- IMPER GARANT Н - 4 kg / m2, EPP 10 m2
- Hydroisol TKP 4.5 (1*10m2)
- PLASTOPER PG4W GREY Tkp 4.0 kg/m² (1x10 m)
- PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- Hydrostekloizol EPP - 3.5
- IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- Polyurethane waterproofing Purtop Easy / 25 kg
- PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- Two-component injection solution Foamjet F 20+23kg
- FOX GROUT FC155 (R4) 25kg
- Hydrostekloizol EKP - 5.0
- FOX MORTAR FC188 T 25kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Hydrostekloizol EPP - 4.0
- Geotextile Dornit Eco 400 g/m2 (2*50)
- one-component injection solution 20 kg - Resfoam 1K-M
- Aerator 100mm/290mm PG (set)
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
Indicator | Value |
Base types | X - Glass canvas T - glass fabric Э - Polyester |
Coating type | К - Coarse-grained dusting П - Dust-like dusting or polyethylene film |
Decoding example "ХКП" | Base - Glass canvas (Х) Top coating - coarse-grained (К) Bottom coating - dust-like dusting or polymer film (П) |
Technical characteristics: | Technical characteristics: | ||
Indicator | Value | Indicator | Value |
Weight of 1 m2 of material, within limits. ХКП/ТКП/ЭКП ХПП/ТПП/ЭПП | 3.5 - 7.0 kg 1.5 - 4.0 kg | Weight of 1 m2 of material, within limits. | 3.5 - 7.0 kg 1,5 - 4,0 კგ |
Heat resistance for 2 hours | 80°С | ХКП/ТКП/ЭКП | 1.5 - 4.0 kg |
Elongation on a round bar with a radius of R = 25.0 ± 0.2 mm (there should be no cracks on the surface of the sample) | 0°С | ХПП/ТПП/ЭПП | 80°С |
Tearing strength at break - on glass canvas - on glass fabric - on polyester | 450 N 550 N 500 N | Heat resistance for 2 hours | 0°С |
Water absorption in 24 hours | No more than 1.0% | Elongation on a round bar with a radius of R = 25.0 ± 0.2 mm | 450 N |
Loss of sand dusting (with coarse-grained dusting) | No more than 15% | (there should be no cracks on the surface of the sample) | 550 N |
Logistics data | |
Pallet length/width | 1,2/1,0 m. |
Number of rolls | From 20 to 42 rolls (depending on the weight of 1 m2 of material) |
(for top layer materials) | From 20 to 42 rolls (depending on the weight of 1 m2 of material) |