bitumen primer - ICopal
- category: Coating waterproofing / Waterproofing
- Brands: ICOPAL
Bitumen Primer Icopal consists of high quality petroleum bitumen and organic solvents. The product is ready for use.
Bitumen Primer Icopal consists of high quality petroleum bitumen and organic solvents. The product is ready for use.
See less
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Average flow rate, l/m2 |
0,3 |
|
Drying time at +20°С, hr, not more |
4 |
|
non-volatile matter content, %, not less |
35 |
|
relative viscosity, seconds, not more |
30 |
|
Dry residue melting point, °С, not less |
70 |
- Low flow rate;
- Short drying period.
APPLICATION AREA
Concrete, sand-cement and metal surface priming before application of welded and self-adhesive roofing and waterproofing rolled bitumen materials, and before application of mastics
APPLICATION METHOD
Application of bitumen primer is carried out with a brush, a paint roller or by spraying at the ambient temperature that varies from -5°С to +45°С. At the temperature that is lower than +5ºС, primer should be conditioned in a warm space for 24 hours at the temperature of no lower than +15ºС.
Before use, the whole volume of primer of the bitumen should be thoroughly mixed. If necessary, it can be diluted with white spirit, kerosene oil or solvent petroleum spirit. The working surface should be dry, pre-cleaned from dust, dirt, snow and ice.
Application of rolled materials and mastics is allowed only after primer is fully dried. It is important to wear gloves when working with the materials. Contact of the materials with eyes and skin is to be avoided.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
bitumen primer - ICopal
choose a product
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- Elastic waterproofing on acrylic base FOX WATERPROF® FS100 20kg
- Polyurethane waterproofing Purtop Easy / 25 kg
- Connecting insulation tape FOX MONOTAPE 120/70 mm 50 m
- Waterproofing material R-COMPOSIT 10 KG
- Universal polyurethane membrane - ICOPER MULTIUSO 20KG ROSSO COPPO
- Two-component injection solution Foamjet T 20+24kg
- Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- Bitumen waterproofing Icopas 18kg
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- Hydroisol TKP 4.0 (1*10m2)
- Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- PLASTOPER PG3W Tpp 3.0 kg/m² (1x10 m)
- Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Unreinforced PVC membrane Mapeplan D15 (1×20m)
- Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- Hydroisol TPP 3.0 (1*10m2)
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Self-adhesive waterproofing tape 20x1000 cm - BUTYLSTRIP
- Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Average flow rate, l/m2 |
0,3 |
|
Drying time at +20°С, hr, not more |
4 |
|
non-volatile matter content, %, not less |
35 |
|
relative viscosity, seconds, not more |
30 |
|
Dry residue melting point, °С, not less |
70 |