one-component injection solution 20 kg - Resfoam 1K-M
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Resfoam 1K-M is a one-component, ultra-fluid polyurethane injection mortar made of special additives and accelerant, prepared according to a formula... See more
Resfoam 1K-M is a one-component, ultra-fluid polyurethane injection mortar made of special additives and accelerant, prepared according to a formula developed in MAPEI research laboratories. It is used for waterproofing structures, soils and rock exposed to intensive water. The reaction time is adjustable. On contact with water, the resin forms a semi-rigid waterproof polyurethane foam. Due to its high elasticity, Resfoam 1K-M penetrates cracks up to one hundred microns wide and can seal them, even if they are prone to water leakage. After curing, after 40-80 seconds, depending on the temperature and the amount of accelerant added, Resfoam 1K-M provides complete waterproofing of the treated surface. Resfoam 1K-M complies with the requirements of EN 1504-9 and EN 15045.
See less
▪ Tunnels subject to water seepage through cracks.
▪ Wells or hydraulic structures where water seeps through working joints or cracks.
▪ Repair of cracks in dams, canals and barriers, even below the groundwater table.
▪ Sealing cracks in pits or in damp, water-saturated foundations.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
one-component injection solution 20 kg - Resfoam 1K-M
choose a product
- FOX GROUT FC155 (R4) 25kg
- Bitumen waterproofing Icopas 18kg
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO
- Elastic waterproofing on acrylic base FOX WATERPROF® FS100 20kg
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- Waterproofing material R-COMPOSIT 10 KG
- Polyurethane waterproofing Purtop Easy / 25 kg
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Coating waterproofing FOX WATERPROF FS100 4 kg
- Epoxy Mortar FOX EPOMORTAR FC510
- Geomat – GEO GM-4 anti-erosion geomat for construction purposes (60m² per piece)
- Two-component injection solution Foamjet F 20+23kg
- waterproofing solution for application to foundations 30 kg - Plastimul 2K Plus
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Hydroisol TKP 4.0 (1*10m2)
- Aerator 100mm/290mm PG (set)
- PVC membrane MAPEPLAN M 15 Broof T1/T3 1.5mm (2.10X20)
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Geotextile Dornit Eco 150 g/m2 (2*50)
- Epoxy Mortar FOX EPOMORTAR FC510
- Hydrostekloizol EPP - 3.5
- Coating waterproofing FOX WATERPROF FS100 4 kg
- Resin-polymer waterproofing FOX WATERPROF FS105 WHİTE 20kg