Waterproofing mastic Profimast (21,5 l / 18 kg)
- category: Coating waterproofing / Waterproofing
- Brands: BITUMAST
Waterproofing mastic is a ready-to-use product, it is based on petroleum products, namely bitumen enriched with certain technological additives  ... See more
Waterproofing mastic is a ready-to-use product, it is based on petroleum products, namely bitumen enriched with certain technological additives
See less
- The product is ready for use.
- The seamless elastic coating contains a herbicidal additive.
- Increases the service life of building structures.
For filling joints and gaps required in roofing work, for processing transitional areas, as well as for rolling roofs. It is used for the arrangement of roofing (it is recommended to sprinkle with sand). It is used to obtain a vapor barrier layer in roofing systems. Thoroughly mix the mastic throughout. The surface to be treated must be dry, previously cleaned of dirt, fragile remnants of the old coating. For application, it is possible to use a spatula (a trowel) - apply in 1-2 layers, depending on the complexity of the work. If necessary, the mastic can be diluted with white spirit, solvent (do not use automotive fuel). When working at low temperatures, it is recommended to warm it up during the day to a temperature not lower than +15°C. Before use, it is recommended to treat the surface with a bituminous primer. Use not lower than -10 ° degrees (after preliminary warming up) is allowed.
Storage: store in a dry place protected from sunlight at a temperature of -30 to +50 degrees. Warranty period of storage is 35 months. Consumption: 1 kg/m at a recommended thickness of 0.5 mm. Precautions: Do not use near open flame. Do not use indoors or outdoors. Avoid contact with eyes and skin
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Waterproofing mastic Profimast (21,5 l / 18 kg)
choose a product
- Waterproofing material R-COMPOSIT 10 KG
- Cement-based waterproofing – FOX MULTISEAL FS367 25kg
- Reinforcement fabric for wet areas FOX TRIPLETAPE PIPE OUTLET 120x120 mm
- Epoxy Mortar FOX EPOMORTAR FC510
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- Transparent polyurethane membrane - BALCONY WATER 10KG
- one-component injection solution 20 kg - Resfoam 1K-M
- Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- FOX GROUT FC155 (R4) 25kg
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- FOX MORTAR FC188 T 25kg
- FOX FASTMORTAR FC233 25kg
- PVC membrane MAPEPLAN M 15 Broof T1/T3 1.5mm (2.10X20)
- Geomat – GEO GM-4 anti-erosion geomat for construction purposes (60m² per piece)
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Unreinforced TPO membrane MAPEPLAN T D 15 (1.05 × 20m)
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- Two-component injection solution Foamjet T 20+24kg
- PLASTOPER PG3W Tpp 3.0 kg/m² (1x10 m)
- IMPER BALANCE H 3,5 - EPP 3.5 kg / m2, 10 m2
- Universal polyurethane membrane - ICOPER MULTIUSO 20KG ROSSO COPPO
- Resin-polymer waterproofing FOX WATERPROF FS105 WHİTE 20kg
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- Hydroisol TPP 3.5 (1*10m2)
- Hydrostekloizol EPP - 3.5
- Bitumen waterproofing Icopas 18kg
- PLASTOPER PG4W GREY Tkp 4.0 kg/m² (1x10 m)