Vilatex in ECP 4.5 kg/sq.m (1*10m)
- category: Roll waterproofing
- Brands: ICOPAL
Rolled bitumen-polymer SBS with coarse-grained sand filler; bitumen-polymer; modified; roll; with high strength polyester;
Rolled bitumen-polymer SBS with coarse-grained sand filler; bitumen-polymer; modified; roll; with high strength polyester;
See less
Width | m | 1 |
Length | m | 10 |
Base | kg/m2 | 4,5 |
Tensile breaking factor H/50 | m | 800 |
Elongation factor | % | 45 |
Heat resistance for at least 2 hours at temperature - Crack resistance at temperature 10 mm | °C | 110 |
Water resistance under pressure, at least 0.2 MPa for 2 hours | MPa | No water leak recorded |
- Reliability,
- long-term protection,
- quick installation,
- adapts to almost all climatic conditions of Georgia.
Used for making or repairing new and old roofs. At the same time, the operation of the building is possible. The product is the last layer of the Vilatex roofing system.
Products offered
Plana P P 4.5 kg/sq.m (10 m) PLANA P 4.5 kg GRAY GF 10 m
- category: Roll waterproofing
- Brands: MAPEI
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Vilatex in ECP 4.5 kg/sq.m (1*10m)
choose a product
- Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- IMPER GARANT Н - 4 kg / m2, EPP 10 m2
- Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- Hydroisol TKP 4.0 (1*10m2)
- Imper Balance B 4.5 -EKP 4.5 kg / m2, 10 m2
- Plana P P 4.5 kg/sq.m (10 m) PLANA P 4.5 kg GRAY GF 10 m
- Vilatex in ECP 2.5 kg/sq.m (1*15m)
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- Hydrostekloizol EKP - 4.5
- Aerator 100mm/290mm PG (set)
- Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- villatex Н - ICOPAL
- PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- ICOpal Ultra В - ICOPAL
Width | m | 1 |
Length | m | 10 |
Base | kg/m2 | 4,5 |
Tensile breaking factor H/50 | m | 800 |
Elongation factor | % | 45 |
Heat resistance for at least 2 hours at temperature - Crack resistance at temperature 10 mm | °C | 110 |
Water resistance under pressure, at least 0.2 MPa for 2 hours | MPa | No water leak recorded |