Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
■ Polyester reinforcement ■ Specially modified bitumen ■ Polymer modifier additive for strength ■ Roll type ■ Mineral filler Roll... See more
■ Polyester reinforcement
■ Specially modified bitumen
■ Polymer modifier additive for strength
■ Roll type
■ Mineral filler
Roll-type, bitumen, modified, reinforced, waterproofing material. Widely used for installation and repair of new and old roofs. Made on polyester reinforcement base with application of double-sided bitumen-polymer layers, which are modified with mineral filler.
See less
Feature Name | measurement | Criterion | IMPERСтандарт В (T) | Test Methodology |
Weight | kg/m2 | ±5 %* | 4.0 | ГОСТ EN 1849-1-2011 |
Thickness** | mm | ±5 % | ГОСТ EN 1849-1-2011 | |
Maximum Elongation: Width Length | n. | ± 200 *** | 1000 1000 | ГОСТ 31899-1-2011 (EN 12311 1:1999) |
Loss of shrinkage | % | ±15 | ГОСТ EN 12039-2011 | |
Water retention 24h | % Mass weight | No more than | 1 | ГОСТ 2678-94 |
Watertightness when pressure is 10 kg/p | - | - | ГОСТ EN 1928-2011, Method А | |
Water resistance when pressure is 0.2 MPa, 24h | - | - | Resistant | ГОСТ 2678-94 |
Heat Resistance | оС | No more than | +100 | ГОСТ EN 1110-2011 |
- Reliability,
- long-term protection,
- quick installation;
- designed for European countries, so it better adapts to climate change in Georgia.
■ Flat roofing
■ Green roofing
■ Foundation waterproofing
■ Easily adaptable to almost all types of roofing.Products offered
Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
IMPER BALANCE H 3,5 - EPP 3.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PLASTOPER PG3W Tpp 3.0 kg/m² (1x10 m)
- category: Waterproofing / Roll waterproofing
- Brands: RAVAGO
Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PVC membrane MAPEPLAN M 15 Broof T1/T3 1.5mm (2.10X20)
- category: Membranes / Waterproofing
- Brands: MAPEI
Unreinforced TPO membrane MAPEPLAN T D 15 (1.05 × 20m)
- category: Membranes / Waterproofing
- Brands: MAPEI
Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
Bitumen waterproofing Icopas 18kg
- category: Coating waterproofing / Waterproofing
- Brands: ICOBIT
Two-component injection solution Foamjet F 20+23kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
choose a product
- Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- Hydroisol TKP 4.0 (1*10m2)
- Hydrostekloizol EPP - 4.0
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- Hydrostekloizol EKP - 5.0
- IMPER BALANCE H 3,5 - EPP 3.5 kg / m2, 10 m2
- PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- Hydroisol TPP 3.5 (1*10m2)
- Hydroisol TKP 4.5 (1*10m2)
- IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- PLASTOPER PG3W Tpp 3.0 kg/m² (1x10 m)
- Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- Hydrostekloizol EKP - 4.5
- Aerator 100mm/290mm PG (set)
- FOX MORTAR FC188 T 25kg
- PVC membrane MAPEPLAN M 15 Broof T1/T3 1.5mm (2.10X20)
- Unreinforced TPO membrane MAPEPLAN T D 15 (1.05 × 20m)
- Fully elastic cement-polymer waterproofing FOX ULTRASEAL-UV FS485 white SET 30kg
- Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- FOX GROUT FC155 (R4) 25kg
- FOX FASTMORTAR FC233 25kg
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- Hydroisol TPP 3.5 (1*10m2)
- IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- Bitumen waterproofing Icopas 18kg
- Two-component injection solution Foamjet F 20+23kg
- Hydrostekloizol EKP - 4.5
Feature Name | measurement | Criterion | IMPERСтандарт В (T) | Test Methodology |
Weight | kg/m2 | ±5 %* | 4.0 | ГОСТ EN 1849-1-2011 |
Thickness** | mm | ±5 % | ГОСТ EN 1849-1-2011 | |
Maximum Elongation: Width Length | n. | ± 200 *** | 1000 1000 | ГОСТ 31899-1-2011 (EN 12311 1:1999) |
Loss of shrinkage | % | ±15 | ГОСТ EN 12039-2011 | |
Water retention 24h | % Mass weight | No more than | 1 | ГОСТ 2678-94 |
Watertightness when pressure is 10 kg/p | - | - | ГОСТ EN 1928-2011, Method А | |
Water resistance when pressure is 0.2 MPa, 24h | - | - | Resistant | ГОСТ 2678-94 |
Heat Resistance | оС | No more than | +100 | ГОСТ EN 1110-2011 |