BUTA Waterproofing Mastic (Rubber Based) 18L
- category: Coating waterproofing / Waterproofing
- Brands: BUTA project
Rubber-based mastic "Buta Project" is a ready multi-component material consisting of petroleum bitumen, crumb rubber, and organic solvent. The crumb r... See more
Country of manufacture: Azerbaijan
See less
Work should be carried out at temperatures between -10°C and +40°C. At temperatures below +5°C, the mastic should be stored at room temperature for at least one day beforehand. Do not use near open flames. Work must be performed in rooms equipped with ventilation systems. Avoid contact with skin and eyes. Use indoors is not recommended. In case of skin contact, wash the mastic off with a solvent.
The mastic "Buta Project" is used for waterproofing, roof installation and repair, anti-corrosion protection of concrete, metal, and other building structures, as well as for fastening various construction materials (fiberboard, plywood, glass, hydro glass insulation (waterproofing material Hydromin), etc.).
Consumption per 1 m² varies between 0.45 and 0.8, depending on the base type.
The universal mastic is designed for all types of waterproofing work. After drying, it forms a coating with strong durability across a wide range of working temperatures. Before use, all surfaces must be cleaned of dust, dirt, and oil. The mastic should be well stirred before use. It is recommended to apply the mastic in 2 layers using a brush or trowel.
Products offered
Two-component injection solution Foamjet T 20+24kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- category: Coating waterproofing / Waterproofing
Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- category: Coating waterproofing / Waterproofing
- Brands: ICOBIT
Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Bitumen waterproofing Icopas 18kg
- category: Coating waterproofing / Waterproofing
- Brands: ICOBIT
Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Universal polyurethane membrane - ICOPER MULTIUSO 20KG ROSSO COPPO
- category: Coating waterproofing / Waterproofing
- Brands: ICOBIT
fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
mortar - FOX BASEMOR FC205 GRAY 25 kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
one-component injection solution 20 kg - Resfoam 1K-M
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Two-component injection solution Foamjet F 20+23kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Geotextile Dornit Eco 300 g/m2 (2*50)
- category: Membranes / Waterproofing
- Brands: TECHNOPLAST
Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Unreinforced TPO membrane MAPEPLAN T D 15 (1.05 × 20m)
- category: Membranes / Waterproofing
- Brands: MAPEI
PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
Bitumen waterproofing Icopas 18kg
- category: Coating waterproofing / Waterproofing
- Brands: ICOBIT
Cement-based waterproofing – FOX MULTISEAL FS367 25kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
BUTA Waterproofing Mastic (Rubber Based) 18L
choose a product
- Two-component injection solution Foamjet T 20+24kg
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Waterproofing fabric FOX ULTRATEX Plus 30 m/roll
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- ICOPER HP 20KG ROSSO COPPO - თხევადი ფიბრირებული მემბრანა
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- Bitumen waterproofing Icopas 18kg
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- Cement-based waterproofing - FOX MULTISEAL STANDART Grey 27kg
- Universal polyurethane membrane - ICOPER MULTIUSO 20KG ROSSO COPPO
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- FOX GROUT FC155 (R4) 25kg
- one-component injection solution 20 kg - Resfoam 1K-M
- FOX MORTAR FC188 T 25kg
- PVC membrane corner MAPEPLAN EXTERNAL WAVY CORNER PLUS
- Two-component injection solution Foamjet F 20+23kg
- Geotextile Dornit Eco 300 g/m2 (2*50)
- Aerator 100mm/290mm PG (set)
- Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- Temperature Joint Waterproofing Tape FOX COMBOTAPE 250 / 1mm ; 20m
- Unreinforced TPO membrane MAPEPLAN T D 15 (1.05 × 20m)
- PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- Bitumen waterproofing Icopas 18kg
- Hydrostekloizol EKP - 4.5
- Cement-based waterproofing – FOX MULTISEAL FS367 25kg
Work should be carried out at temperatures between -10°C and +40°C. At temperatures below +5°C, the mastic should be stored at room temperature for at least one day beforehand. Do not use near open flames. Work must be performed in rooms equipped with ventilation systems. Avoid contact with skin and eyes. Use indoors is not recommended. In case of skin contact, wash the mastic off with a solvent.