Syntan Solo vent - ICOPAL
- category: Roll waterproofing
- Brands: ICOPAL
Roll-fed polymeric-bitumen SBS-modified material is made on a non-woven basis from high durability polyester with coarse-grained sand on the top side.... See more
Roll-fed polymeric-bitumen SBS-modified material is made on a non-woven basis from high durability polyester with coarse-grained sand on the top side. On the lower side the material is protected with longitudinally corrugated adhesive strips developed by use of a protective “Profile SBS” technology and coated with an easily flammable polyethylene film.
See less
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Width, m |
1 |
|
Length, m |
7 |
|
Weight, kg/m2 |
5,7 |
|
Base |
High durability polyester |
|
Breaking load under tension, N/50 mm, not less |
600 |
|
relative elongation, %, not lower |
20 |
|
Heat resistance during two hours at the temperature of °С, not lower |
100 |
|
Radius of curvature with radius at bent 25 mm at the temperature of °С, not above |
-25 |
|
Ductile-to-brittle transition temperature of polymeric-bitumen binder at the temperature of °С, not above |
-35 |
|
Waterproofing under a pressure 0.2 MPa, not lower, during two hours |
No signs of water leak |
|
Water absorption during 24 hours by weight, %, not above |
1 |
-
reliabilityanddurability;
-
fast mounting;
-
load decrease on bearing structures against traditional double layer decisions
-
solution to roofing structure residual humidity issue through special ventilation channels
-
economical practicality of single layer solution arrangement
-
high physical and mechanical characteristics;
-
applicable in all climatic zones of Russian Federation.
APPLICATION AREA
- Arrangement of new roofing;
- Maintenance of old out-of-use roofing.
APPLICATION METHOD
- Fusion-bond to base by thermal activation (short-term heat impact on adhesive strips).
Products offered
Gidrostekloizol TKP 4.5 (1*10m2)
- category: Waterproofing / Roll waterproofing
- Brands: KRZ
Reinforced polyethylene membrane 3.0 - 100 g (1.5 x 50m) (75m2)
- category: Roll waterproofing
Elastoizol Prof TKP-4.5 (1*10m2)
- category: Roll waterproofing
- Brands: KRZ
Self-adhesive roll membrane ELASTOFLEX SA P
- category: Roll waterproofing
- Brands: MAPEI
ELASTOFLEX SA P 2 mm ELASTOFLEX SA P 2 mm FR 15 m
- category: Waterproofing / Roll waterproofing
delivery
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available."
Delivery time:
- Tbilisi
Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Syntan Solo vent - ICOPAL
choose a product
- Gidrostekloizol TKP 4.5 (1*10m2)
- Hydroisol TKP 4.0 (1*10m2)
- IMPER BALANCE H 3,5 - EPP 3.5 kg / m2, 10 m2
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- ANTIRADICE PE P 4mm F F 10m
- Hydroisol TPP 3.0 (1*10m2)
- Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- Reinforced polyethylene membrane 3.0 - 100 g (1.5 x 50m) (75m2)
- Elastoizol Prof TKP-4.5 (1*10m2)
- IMPER GARANT Н - 4 kg / m2, EPP 10 m2
- Self-adhesive roll membrane ELASTOFLEX SA P
- ELASTOFLEX SA P 2 mm ELASTOFLEX SA P 2 mm FR 15 m
- villatex В - ICOPAL
- Ultranap - ICOPAL
- icopal ultra Н
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Width, m |
1 |
|
Length, m |
7 |
|
Weight, kg/m2 |
5,7 |
|
Base |
High durability polyester |
|
Breaking load under tension, N/50 mm, not less |
600 |
|
relative elongation, %, not lower |
20 |
|
Heat resistance during two hours at the temperature of °С, not lower |
100 |
|
Radius of curvature with radius at bent 25 mm at the temperature of °С, not above |
-25 |
|
Ductile-to-brittle transition temperature of polymeric-bitumen binder at the temperature of °С, not above |
-35 |
|
Waterproofing under a pressure 0.2 MPa, not lower, during two hours |
No signs of water leak |
|
Water absorption during 24 hours by weight, %, not above |
1 |