SINTAN Solo Vent FM ECM 6.5 kgm2 (17m)
- category: ჰიდროიზოლაცია / ჰიდრო-რულონური
- Brands: ICOPAL
Rolled bitumen-polymer SBS-modified material on a non-woven base made of high-strength polyester with a coarse-grained coating on the top side. The un... See more
Rolled bitumen-polymer SBS-modified material on a non-woven base made of high-strength polyester with a coarse-grained coating on the top side. The underside of the roofing felt is protected by a special heat-resistant Syntan coating, onto which adhesive strips are applied using longitudinal corrugation technology, covered with a polyethylene film made of non-flammable material.
Manufacturer country - Russia
See less
Width, m 1 Length, m 7 Weight, kg/sq.m 5.7 Base type: high-strength polyester Tensile strength, N/50 mm, no less than 600 Relative elasticity, %, no less than 20 Heat resistance for 2 hours at temperature , °C, not less than 100 Flexibility on a beam with a radius of curvature of 25 mm at a temperature, °C, not more than minus 25 Brittle temperature of bitumen-polymer binder, °C, not more than minus 35 Water resistance at a pressure of not less than 0.2 MPa for 2 hours later there are no signs of water penetration. Water absorption over 24 hours by weight, %, no more than 1.
Products offered
Drainage membrane PG 400 g/m2 (2*20)
- category: Membranes / Waterproofing
- Brands: PROTECH GLOBAL
Aerator 100mm/290mm PG (set)
- category: Waterproofing / Roll waterproofing
- Brands: PROTECH GLOBAL
HYDROline 1000mm basic element type I cast iron (Hydrotec)
- category: Membranes / Waterproofing
- Brands: HYDROTEC
Aerator 100mm/290mm PG (set)
- category: Waterproofing / Roll waterproofing
- Brands: PROTECH GLOBAL
Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- category: Roll waterproofing
- Brands: TECHNONICOL IMPER
Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- category: Roll waterproofing
- Brands: TECHNONICOL IMPER
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 300, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
SINTAN Solo Vent FM ECM 6.5 kgm2 (17m)
choose a product
- FOX TRIPLETAPE PIPE OUTLET
- Drainage membrane PG 400 g/m2 (2*20)
- Aerator 100mm/290mm PG (set)
- PVC Waterstop M 25/4
- MAPEPLAN EXTERNAL WAVY CORNER PLUS
- Polymer geogrid APROGRID SD-20 (40x40)
- HYDROline 1000mm basic element type I cast iron (Hydrotec)
- Aerator 100mm/290mm PG (set)
- Imper Standard (T) V - TKP 4.0 kg/m2, 10 m2
- Elastoisol Optim TKP-4.0 A (1*10m2)
- Hydroisol TKP 4.0 (1*10m2)
- villatex Н - ICOPAL
- Imper Balance (T) B 4.5 - TKP 4.5 kg / m2, 10 m2
- villatex В - ICOPAL
- icopal ultra Н
Width, m 1 Length, m 7 Weight, kg/sq.m 5.7 Base type: high-strength polyester Tensile strength, N/50 mm, no less than 600 Relative elasticity, %, no less than 20 Heat resistance for 2 hours at temperature , °C, not less than 100 Flexibility on a beam with a radius of curvature of 25 mm at a temperature, °C, not more than minus 25 Brittle temperature of bitumen-polymer binder, °C, not more than minus 35 Water resistance at a pressure of not less than 0.2 MPa for 2 hours later there are no signs of water penetration. Water absorption over 24 hours by weight, %, no more than 1.