villatex Н - ICOPAL
- category: Roll waterproofing / Waterproofing
- Brands: ICOPAL
villatex Н - Roll-fed polymeric-bitumen SBS-modified material on a glass fiber with an easily flammable polyethylene film on the top side. On the lowe... See more
villatex Н - Roll-fed polymeric-bitumen SBS-modified material on a glass fiber with an easily flammable polyethylene film on the top side. On the lower side the material has a longitudinally corrugated torchable layer developed by use of a protective “Profile SBS” technology and coated with an easily flammable polyethylene film.
See less
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Width, m |
1 |
|
Length, m |
15 |
|
Weight, kg/m2 |
3,0 |
|
Base |
Glass fiber |
|
Breaking load under tension, N/50 mm, not lower |
600 |
|
Heat resistance during two hours at the temperature of °С, not lower |
90 |
|
Radius of curvature with radius at bent 25 mm at the temperature of °С, not above |
-15 |
|
Ductile-to-brittle transition temperature of polymeric-bitumen binder at the temperature of °С, not above |
-25 |
|
Waterproofing under a pressure 0.2 MPa during two hours, not less |
No signs of water leak |
|
Water absorption during 24 hours by weight, %, not above |
1,5 |
ADVANTAGES
-
reliabilityanddurability;
-
fast mounting;
-
applicable in all climatic zones of Russian Federation;
APPLICATION AREA
- Arrangement of new roofing and maintenance of old out-of-use roofing;
- Lower layer of a roofing system Villatex;
- Arrangement of Vapour-proof barrier;
- Waterproofing of indoor premises of buildings.
APPLICATION METHOD
- Fusion-bond to base.
Products offered
PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
PLASTOPER PG3W Tpp 3.0 kg/m² (1x10 m)
- category: Waterproofing / Roll waterproofing
- Brands: RAVAGO
IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- category: Roll waterproofing / Waterproofing
- Brands: IMPER
Aerator with 70 mm diameter / height 270 mm
- category: Roll waterproofing / Waterproofing
PLASTOPER PG4W GREY Tkp 4.0 kg/m² (1x10 m)
- category: Waterproofing / Roll waterproofing
- Brands: RAVAGO
Bitumen waterproofing Icopas 18kg
- category: Coating waterproofing / Waterproofing
- Brands: ICOBIT
Coating waterproofing FOX WATERPROF FS100 4 kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Unreinforced TPO membrane MAPEPLAN T D 15 (1.05 × 20m)
- category: Membranes / Waterproofing
- Brands: MAPEI
Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- category: Roll waterproofing / Waterproofing
- Brands: RAVAGO
Geotextile Dornit Eco 500 g/m2 (2*50)
- category: Membranes / Waterproofing
- Brands: TECHNOPLAST
Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- category: Coating waterproofing / Waterproofing
Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- category: Coating waterproofing / Waterproofing
- Brands: FOX BAU
Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO
- category: Coating waterproofing / Waterproofing
- Brands: ICOBIT
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
villatex Н - ICOPAL
choose a product
- Hydrostekloizol EKP - 4.5
- PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- Hydrostekloizol EKP - 5.0
- PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- IMPER GARANT B 5.0 - ekp 5 kg / m2, 10 m2
- Hydroisol TPP 3.0 (1*10m2)
- PLASTOPER PG3W Tpp 3.0 kg/m² (1x10 m)
- IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- Hydroisol TPP 3.5 (1*10m2)
- Aerator with 70 mm diameter / height 270 mm
- Hydroisol TKP 4.0 (1*10m2)
- Hydrostekloizol EPP - 3.5
- Aerator 100mm/290mm PG (set)
- PLASTOPER PG4W GREY Tkp 4.0 kg/m² (1x10 m)
- Hydroisol TKP 4.5 (1*10m2)
- Bitumen waterproofing Icopas 18kg
- Hydrostekloizol EKP - 4.5
- Coating waterproofing FOX WATERPROF FS100 4 kg
- Unreinforced TPO membrane MAPEPLAN T D 15 (1.05 × 20m)
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- PLASTOPER PG4,5W GREY ტკპ 4.5 კგ/მ2 (1*10 მ)
- Synthetic rubber waterproofing Aquaflex Roof HR / 20 kg
- PLASTOPER PG3,5W ტპპ 3.5 კგ/მ2 (1*10 მ)
- Geotextile Dornit Eco 500 g/m2 (2*50)
- Reinforcement fabric for wet areas FOX TRIPLETAPE DRENAJ 425x425 mm
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- Polyurethane single-component waterproofing S-COMPOSITE STANDART-5KG
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO
|
PARAMETER ITEM, MEASURE UNIT |
VALUE |
|
Width, m |
1 |
|
Length, m |
15 |
|
Weight, kg/m2 |
3,0 |
|
Base |
Glass fiber |
|
Breaking load under tension, N/50 mm, not lower |
600 |
|
Heat resistance during two hours at the temperature of °С, not lower |
90 |
|
Radius of curvature with radius at bent 25 mm at the temperature of °С, not above |
-15 |
|
Ductile-to-brittle transition temperature of polymeric-bitumen binder at the temperature of °С, not above |
-25 |
|
Waterproofing under a pressure 0.2 MPa during two hours, not less |
No signs of water leak |
|
Water absorption during 24 hours by weight, %, not above |
1,5 |