WOOD CARE-W 0.75LT (protection agent for wooden surfaces)
- category: CHROMODOMI / Wood care products / Varnishes and accessories
- Brands: CHROMODOMI
Protective material for all types of wooden surfaces. Suitable for long-term protection of wooden surfaces exposed to environmental fa... See more
Protective material for all types of wooden surfaces. Suitable for long-term protection of wooden surfaces exposed to environmental factors. Provides reliable protection against weather changes. Protects against UV and sunlight
See less
Consumption 8-10 m2 per properly prepared surface.
The solution is ready for use.
Drying time 1-2 hours depending on environmental conditions.
Color is transparent, corresponds to the color chart
Instructions for use:
- To ensure reliable adhesion of the product, the surface must be clean, dry and free of defects such as adhering materials, dust, grease, oil, rust, moss, steam, etc.
- Sand the surface with suitable sandpaper until smooth and apply the product undiluted.
- Wait until dry and apply a second coat after 1-2 hours.
- The final surface color depends on the absorbency of the material, the color of the raw material and the number of coats applied.
- It reaches full resistance to mechanical loads after 20-30 days.
Operating conditions:
- Do not use (apply) at temperatures below 6 °C and above 40 °C and relative humidity above 80%. Unfavorable operating conditions may change the quality properties of the product.
Application tools:
- Brush.
- Roller
Keep the tools in the container in a “wet” condition during operation. Collect all product (paint) from tools in container and wash tools with warm soapy water. If the paint is dry, you can only scrub it off with a strong detergent. Do not pour rinse water into ground water.
Storage:
After use, close the container tightly to preserve the paint for future use. Store in a cool place. Keep away from freezing and direct sunlight.
Packaging:
Metal containers with capacities of 750 ml, 3 liters, 20 liters.
According to the European standard the permissible amount of organic solvents in this type of product is 700 g/l. The amount of volatile organic substances in this product - 695 g/l - complies with the European Union requirements for this type of product.
Waste Management:
To avoid environmental pollution, product waste requires special treatment and should not be disposed of with household waste. Please contact your local authorities for more information on waste collection and disposal.
Safety instructions:
Keep out of reach of children. Avoid contact with skin and/or eyes. In case of eye contact, rinse immediately with running water, seek medical advice if necessary. If swallowed, seek medical advice immediately. The workplace should be well ventilated. Wear personal protective equipment during application.
.png)
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
WOOD CARE-W 0.75LT (protection agent for wooden surfaces)
choose a product
- Silicone paint Cover Sil 16 LT
- Wood Surface Protector - WOOD CARE No800 Transparent 2.5LT
- Varnish for stone and concrete. STONE VARNISH WATER 2,5Lt
- Silicone paint Cover Sil (base TR)
- Elastomeric cement-based paint – LIFE ACRYL FIBER ELASTIC WHITE
- Primer for plasterboard - STEP PLASTER PRIMER
- WOOD CARE-W Νο914 GREEN (ხის ზედაპირის დამცავი)
- Acrylic paint for facades COVER-ACRYL WHITE
- Enamel paint for bathroom and tile TILE PAINT (base D) 2.5 l
- WOOD CARE-W 2,5LT (protection agent for wooden surfaces)
- WOOD CARE-W Νο909 DARK CHESNUT (ხის ზედაპირის დამცავი )
- Road/Parking Paint White - 4kg
- Paint with aging effect CHALK PAINT EFFECT (BASE D) 0,75LT
- Emulsion paint COVER-LATEX WHITE
- Silicone paint Cover Sil 16 LT (base P)
- Ground wood SG-14 COMODO 0.7 l..
- Wood Surface Protector - WOOD CARE No800 Transparent 2.5LT
- WOOD CARE-W Νο903 WALNUT LIGHT (ხის ზედაპირის დამცავი)
- WOOD CARE-W 2,5LT (protection agent for wooden surfaces)
- Antiseptic concentrate 1:6 Weco 10 L colorless
- WOOD CARE-W Νο914 GREEN (ხის ზედაპირის დამცავი)
- WOOD CARE-W Νο905 ROSEBUSH (ხის ზედაპირის დამცავი )
- Anti-fire antiseptic solution Weco 5 L colorless
- Wood primer antiseptic 1 L colorless
- WOOD CARE-W Νο909 DARK CHESNUT (ხის ზედაპირის დამცავი )
- WOOD CARE 0.75LT (protection agent for wooden surfaces)
- Drilling wood SG-14 COMODO 2.3 l.
- Antiseptic concentrate 1:6 Weco 5 L colorless
- Wood Surface Protector - WOOD CARE No800 Transparent 2.5LT
- Enamel for heating batteries, white, aerosol (520 ml)
- Universal enamel purple, aerosol (520 ml)
- საღებავი წყალდისპ.შიდა სამუშ. STEP-LATEX HIGH LEVEL (BASE TR) 3LT
- STEP PRIMER (primer based on acrylic emulsion)
- Enamel nitro paint MOTOR LAC 0.75LT
- Universal enamel metallic green olive, aerosol (520 ml)
- Gloss enamel paint – STEP-LAC 0.75 L
- Universal enamel metallic orange, aerosol (520 ml)
- Varnish for stone and concrete, semi-gloss STONE VARNISH WATER SATINE 2.5 l
- Universal enamel gold reflecting, aerosol (520 ml)
- 18 cm long nap paint roller with handle for water emulsion 0111-104818 Hardex
- Emulsion Paint for Interior Work STEP-LATEX HIGH LEVEL (BASE TR) 10LT
- Enamel set " Craquelure " - effect of cracks on ivory gold, aerosol (2 x 520 ml)
- Emulsion paint for interior work STEP-LATEX HIGH LEVEL WHITE 10LT
Consumption 8-10 m2 per properly prepared surface.
The solution is ready for use.
Drying time 1-2 hours depending on environmental conditions.
Color is transparent, corresponds to the color chart
Instructions for use:
- To ensure reliable adhesion of the product, the surface must be clean, dry and free of defects such as adhering materials, dust, grease, oil, rust, moss, steam, etc.
- Sand the surface with suitable sandpaper until smooth and apply the product undiluted.
- Wait until dry and apply a second coat after 1-2 hours.
- The final surface color depends on the absorbency of the material, the color of the raw material and the number of coats applied.
- It reaches full resistance to mechanical loads after 20-30 days.
Operating conditions:
- Do not use (apply) at temperatures below 6 °C and above 40 °C and relative humidity above 80%. Unfavorable operating conditions may change the quality properties of the product.
Application tools:
- Brush.
- Roller
Keep the tools in the container in a “wet” condition during operation. Collect all product (paint) from tools in container and wash tools with warm soapy water. If the paint is dry, you can only scrub it off with a strong detergent. Do not pour rinse water into ground water.
Storage:
After use, close the container tightly to preserve the paint for future use. Store in a cool place. Keep away from freezing and direct sunlight.
Packaging:
Metal containers with capacities of 750 ml, 3 liters, 20 liters.
According to the European standard the permissible amount of organic solvents in this type of product is 700 g/l. The amount of volatile organic substances in this product - 695 g/l - complies with the European Union requirements for this type of product.
Waste Management:
To avoid environmental pollution, product waste requires special treatment and should not be disposed of with household waste. Please contact your local authorities for more information on waste collection and disposal.
Safety instructions:
Keep out of reach of children. Avoid contact with skin and/or eyes. In case of eye contact, rinse immediately with running water, seek medical advice if necessary. If swallowed, seek medical advice immediately. The workplace should be well ventilated. Wear personal protective equipment during application.
.png)