METAL PRIMER (GREY) (anti-corrosion primer for metal surfaces)
- category: CHROMODOMI / მეტალის ანტიკოროზიული საღებავები / Varnishes and accessories
- Brands: CHROMODOMI
High quality primer with excellent anti-corrosion properties. Protects any metal surface andprepares it for the application of the finishing coa... See more
High quality primer with excellent anti-corrosion properties. Protects any metal surface and
prepares it for the application of the finishing coat. Dries quickly and withstands high temperatures (up
to 100°C). Suitable for cars, railings, radiators and any surface requiring corrosion protection.
- Color: available in gray, black, red-ochre, turquoise and brown.
- Packaging: 375ml, 750ml, 2.5L, 9L.
See less
Surface preparation:
- To ensure reliable adhesion of the product, the surface must be clean, dry and free from defects such
as adhering materials, dust, grease, oil, rust, moss, steam, etc.
- Apply by brush, roller or sprayer and wait 20-40 minutes for it to dry.
- Sand the surface with suitable sandpaper to obtain a smooth surface, preparing it for the next coat.
- It reaches full resistance to mechanical stress after 20-30 days.
Conditions of use:
- Do not use (apply) at temperatures below 6 °C and above 40 °C and relative humidity above 80%.
Unfavorable operating conditions may change the quality properties of the product.
Application tools:
- Brush.
- Roller.
- Sprayer.
Keep the tools in the container “wet” during operation. Drain paint from tools into container and rinse
tools with white spirit only. If the paint has dried, only a strong detergent can be used to scrub it off. Do
not pour the washing water into groundwater.
Consumption: 10 - 12 m2/liter per person;
Dilution: 1 - 5% nitro solvent or white spirit;
Drying time: 20 - 40 minutes, depending on the conditions of application;
Precautions: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of contact with
eyes, rinse immediately with running water, seek medical advice if necessary. If swallowed, seek medical
advice immediately. The workplace should be well ventilated. Wear personal protective equipment
during application.
Maximum content of volatile organic compounds:
The permissible amount of VOCs for this product category is 350 g/l. The amount of VOCs in this
product is 345 g/l, which complies with the European Union requirements for this type of product.
Waste management:
In order not to pollute the environment, production waste requires special recycling. Therefore, do not
dispose of it together with household waste. Please contact your local authorities for more information
on waste collection and disposal.
Storage: After use, close the container tightly and store for future use. Store in a cool place. Keep away
from freezing and direct sunlight.
The entry “EL.OT * 7.88.” referring to the characteristic of the paint is part of the Greek standard
according to which the characteristics of the paint are defined.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
METAL PRIMER (GREY) (anti-corrosion primer for metal surfaces)
choose a product
- Varnish for wood, glossy RED-SUN No857 0REGON 2.5l
- Anti-corrosion primer. METAL PRIMER (black) 2.5 l
- Acrylic paint for facade COVER-ACRYL (ΒΑSE Ρ) (1L. 3L. 9L. 16L)
- CHASSIS COAT 2.5LT corrosion protection enamel paint
- Gloss enamel paint – STEP-LAC 0.75 L
- WOOD CARE-W Νο914 GREEN (ხის ზედაპირის დამცავი)
- Primer for plasterboard - STEP PLASTER PRIMER
- Paint with aging effect CHALK PATNT EFFECT (BASE D) 0,375LT
- Acrylic paint for facades COVER-ACRYL WHITE
- MARTELE HAMMERED 2,5LT (paint with hammered effect)
- Varnish for wood, glossy RED-SUN No859 DARK CHESTNUT 2.5 l
- Enamel nitro paint MOTOR LAC 0.75LT
- Water-based wood varnish, glossy WATER RED-SUN CLEAR 2.5l
- Emulsion paint NATURA-LATEX WHITE
- Enamel nitro paint MOTOR LAC 2.5LT
- Anti-corrosion primer. METAL PRIMER (black) 2.5 l
- Enamel anti-corrosion paint CHASSIS COAT 0.75LT
- CHASSIS COAT 2.5LT corrosion protection enamel paint
- Enamel 3 in 1.FAST & Right (base D) 2.5 l
- Anti-corrosion Master Antipass 1
- Nitroemal paint
- Acrylic Universal Enamel RAL 4008 Fresh Purple, Aerosol (520ml)
- Brush flat 2''(with plastic handle) 0200-314420 Series *31*
- Rubber pressure roller for wallpaper 0610-453505
- Universal enamel metallic orange, aerosol (520 ml)
- Silicone paint Cover Sil 16 LT (base P)
- Universal enamel ivory pastel, aerosol (520 ml)
- WOOD CARE-W Νο909 DARK CHESNUT (ხის ზედაპირის დამცავი )
- Paint roller 18 cm with handle 0111-384818
- Wallpaper Plastic Trowel 0610-522800
- Nitroemal paint
- Enamel nitro paint MOTOR LAC 2.5LT
- საღებავი წყალდისპ.შიდა სამუშ. STEP-LATEX HIGH LEVEL (BASE P) 0,97LT
- Universal enamel metallic turquoise, aerosol (520 ml)
- Emulsion paint COVER-LATEX WHITE
Surface preparation:
- To ensure reliable adhesion of the product, the surface must be clean, dry and free from defects such
as adhering materials, dust, grease, oil, rust, moss, steam, etc.
- Apply by brush, roller or sprayer and wait 20-40 minutes for it to dry.
- Sand the surface with suitable sandpaper to obtain a smooth surface, preparing it for the next coat.
- It reaches full resistance to mechanical stress after 20-30 days.
Conditions of use:
- Do not use (apply) at temperatures below 6 °C and above 40 °C and relative humidity above 80%.
Unfavorable operating conditions may change the quality properties of the product.
Application tools:
- Brush.
- Roller.
- Sprayer.
Keep the tools in the container “wet” during operation. Drain paint from tools into container and rinse
tools with white spirit only. If the paint has dried, only a strong detergent can be used to scrub it off. Do
not pour the washing water into groundwater.
Consumption: 10 - 12 m2/liter per person;
Dilution: 1 - 5% nitro solvent or white spirit;
Drying time: 20 - 40 minutes, depending on the conditions of application;
Precautions: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of contact with
eyes, rinse immediately with running water, seek medical advice if necessary. If swallowed, seek medical
advice immediately. The workplace should be well ventilated. Wear personal protective equipment
during application.
Maximum content of volatile organic compounds:
The permissible amount of VOCs for this product category is 350 g/l. The amount of VOCs in this
product is 345 g/l, which complies with the European Union requirements for this type of product.
Waste management:
In order not to pollute the environment, production waste requires special recycling. Therefore, do not
dispose of it together with household waste. Please contact your local authorities for more information
on waste collection and disposal.
Storage: After use, close the container tightly and store for future use. Store in a cool place. Keep away
from freezing and direct sunlight.
The entry “EL.OT * 7.88.” referring to the characteristic of the paint is part of the Greek standard
according to which the characteristics of the paint are defined.