WOOD CARE-W 0.75LT (protection agent for wooden surfaces)
- category: CHROMODOMI / Wood care products
- Brands: CHROMODOMI
Protective material for all types of wooden surfaces. Suitable for long-term protection of wooden surfaces exposed to environmental fa... See more
Protective material for all types of wooden surfaces. Suitable for long-term protection of wooden surfaces exposed to environmental factors. Provides reliable protection against weather changes. Protects against UV and sunlight
See less
Consumption 8-10 m2 per properly prepared surface.
The solution is ready for use.
Drying time 1-2 hours depending on environmental conditions.
Color is transparent, corresponds to the color chart
Instructions for use:
- To ensure reliable adhesion of the product, the surface must be clean, dry and free of defects such as adhering materials, dust, grease, oil, rust, moss, steam, etc.
- Sand the surface with suitable sandpaper until smooth and apply the product undiluted.
- Wait until dry and apply a second coat after 1-2 hours.
- The final surface color depends on the absorbency of the material, the color of the raw material and the number of coats applied.
- It reaches full resistance to mechanical loads after 20-30 days.
Operating conditions:
- Do not use (apply) at temperatures below 6 °C and above 40 °C and relative humidity above 80%. Unfavorable operating conditions may change the quality properties of the product.
Application tools:
- Brush.
- Roller
Keep the tools in the container in a “wet” condition during operation. Collect all product (paint) from tools in container and wash tools with warm soapy water. If the paint is dry, you can only scrub it off with a strong detergent. Do not pour rinse water into ground water.
Storage:
After use, close the container tightly to preserve the paint for future use. Store in a cool place. Keep away from freezing and direct sunlight.
Packaging:
Metal containers with capacities of 750 ml, 3 liters, 20 liters.
According to the European standard the permissible amount of organic solvents in this type of product is 700 g/l. The amount of volatile organic substances in this product - 695 g/l - complies with the European Union requirements for this type of product.
Waste Management:
To avoid environmental pollution, product waste requires special treatment and should not be disposed of with household waste. Please contact your local authorities for more information on waste collection and disposal.
Safety instructions:
Keep out of reach of children. Avoid contact with skin and/or eyes. In case of eye contact, rinse immediately with running water, seek medical advice if necessary. If swallowed, seek medical advice immediately. The workplace should be well ventilated. Wear personal protective equipment during application.
.png)
Products offered
Varnish for wood, glossy RED-SUN No859 DARK CHESTNUT 2.5 l
- category: Varnish / CHROMODOMI
- Brands: CHROMODOMI
Enamel nitro paint MOTOR LAC 2.5LT
- category: CHROMODOMI / მეტალის ნიტრო საღებავები
- Brands: CHROMODOMI
Silicone Facade Paint LIFE SIL (BASE D) 10LT
- category: Exterior paint / CHROMODOMI
- Brands: CHROMODOMI
Лак для дерева, глянцевый RED-SUN No851 PALLISANDER 2,5л
- category: Varnish / CHROMODOMI
- Brands: CHROMODOMI
THERMOFLEX (BASE Ρ) 10LT
- category: Varnishes and accessories / CHROMODOMI / Exterior paint
- Brands: CHROMODOMI
Semi-finished adhesive for polystyrene and all types of cement materials POLY GLUE 15KG
- category: CHROMODOMI / Exterior paint
- Brands: CHROMODOMI
Water-based enamel paint for metal and wood WATER STEP-LAC SATINE (base D) 2.5 l
- category: Paint for wood and metal / CHROMODOMI
- Brands: CHROMODOMI
Varnish for wood, glossy RED-SUN No854 PINE 2.5l
- category: Varnish / CHROMODOMI
- Brands: CHROMODOMI
Wood Surface Protector - WOOD CARE No800 Transparent 2.5LT
- category: CHROMODOMI / Wood care products
- Brands: CHROMODOMI
Primer for plasterboard - STEP PLASTER PRIMER
- category: CHROMODOMI / Interior paint / Paint thinner | Ground | ფითხი
- Brands: CHROMODOMI
Enamel 3 in 1.FAST & Right (base D) 2.5 l
- category: CHROMODOMI / მეტალის ანტიკოროზიული საღებავები
- Brands: CHROMODOMI
STEP PRIMER (primer based on acrylic emulsion)
- category: CHROMODOMI / Interior paint / Exterior paint / Paint thinner | Ground | ფითხი
- Brands: CHROMODOMI
WOOD CARE 0.75LT (protection agent for wooden surfaces)
- category: CHROMODOMI / Wood care products
- Brands: CHROMODOMI
Enamel anti-corrosion paint CHASSIS COAT 0.75LT
- category: CHROMODOMI / მეტალის ანტიკოროზიული საღებავები
- Brands: CHROMODOMI
Paint with aging effect CHALK PATNT EFFECT (BASE D) 0,375LT
- category: Paint for wood and metal / CHROMODOMI
- Brands: CHROMODOMI
WOOD CARE-W Νο903 WALNUT LIGHT (ხის ზედაპირის დამცავი)
- category: CHROMODOMI / Wood care products
- Brands: CHROMODOMI
WOOD CARE-W 2,5LT (protection agent for wooden surfaces)
- category: CHROMODOMI / Wood care products
- Brands: CHROMODOMI
WOOD CARE 0.75LT (protection agent for wooden surfaces)
- category: CHROMODOMI / Wood care products
- Brands: CHROMODOMI
WOOD CARE-W Νο905 ROSEBUSH (ხის ზედაპირის დამცავი )
- category: CHROMODOMI / Wood care products
- Brands: CHROMODOMI
WOOD CARE-W Νο909 DARK CHESNUT (ხის ზედაპირის დამცავი )
- category: CHROMODOMI / Wood care products
- Brands: CHROMODOMI
Drilling wood SG-14 COMODO 2.3 l.
- category: Wood care products
- Brands: Atoll
WOOD CARE-W Νο914 GREEN (ხის ზედაპირის დამცავი)
- category: CHROMODOMI / Wood care products
- Brands: CHROMODOMI
Wood Surface Protector - WOOD CARE No800 Transparent 2.5LT
- category: CHROMODOMI / Wood care products
- Brands: CHROMODOMI
delivery
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available."
Delivery time:
- Tbilisi
Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
WOOD CARE-W 0.75LT (protection agent for wooden surfaces)
choose a product
- Varnish for wood, glossy RED-SUN No859 DARK CHESTNUT 2.5 l
- Enamel nitro paint MOTOR LAC 2.5LT
- Silicone Facade Paint LIFE SIL (BASE D) 10LT
- Лак для дерева, глянцевый RED-SUN No851 PALLISANDER 2,5л
- THERMOFLEX (BASE Ρ) 10LT
- Semi-finished adhesive for polystyrene and all types of cement materials POLY GLUE 15KG
- Water-based enamel paint for metal and wood WATER STEP-LAC SATINE (base D) 2.5 l
- Varnish for wood, glossy RED-SUN No854 PINE 2.5l
- Wood Surface Protector - WOOD CARE No800 Transparent 2.5LT
- Primer for plasterboard - STEP PLASTER PRIMER
- Enamel 3 in 1.FAST & Right (base D) 2.5 l
- STEP PRIMER (primer based on acrylic emulsion)
- WOOD CARE 0.75LT (protection agent for wooden surfaces)
- Enamel anti-corrosion paint CHASSIS COAT 0.75LT
- Paint with aging effect CHALK PATNT EFFECT (BASE D) 0,375LT
- Ground wood SG-14 COMODO 0.7 l..
- WOOD CARE-W Νο903 WALNUT LIGHT (ხის ზედაპირის დამცავი)
- WOOD CARE-W 2,5LT (protection agent for wooden surfaces)
- Wood primer antiseptic 1 L colorless
- Anti-fire antiseptic solution Weco 5 L colorless
- WOOD CARE 0.75LT (protection agent for wooden surfaces)
- WOOD CARE-W Νο905 ROSEBUSH (ხის ზედაპირის დამცავი )
- Antiseptic concentrate 1:6 Weco 5 L colorless
- Antiseptic concentrate 1:6 Weco 10 L colorless
- WOOD CARE-W Νο909 DARK CHESNUT (ხის ზედაპირის დამცავი )
- Drilling wood SG-14 COMODO 2.3 l.
- WOOD CARE-W Νο914 GREEN (ხის ზედაპირის დამცავი)
- Wood Surface Protector - WOOD CARE No800 Transparent 2.5LT
Consumption 8-10 m2 per properly prepared surface.
The solution is ready for use.
Drying time 1-2 hours depending on environmental conditions.
Color is transparent, corresponds to the color chart
Instructions for use:
- To ensure reliable adhesion of the product, the surface must be clean, dry and free of defects such as adhering materials, dust, grease, oil, rust, moss, steam, etc.
- Sand the surface with suitable sandpaper until smooth and apply the product undiluted.
- Wait until dry and apply a second coat after 1-2 hours.
- The final surface color depends on the absorbency of the material, the color of the raw material and the number of coats applied.
- It reaches full resistance to mechanical loads after 20-30 days.
Operating conditions:
- Do not use (apply) at temperatures below 6 °C and above 40 °C and relative humidity above 80%. Unfavorable operating conditions may change the quality properties of the product.
Application tools:
- Brush.
- Roller
Keep the tools in the container in a “wet” condition during operation. Collect all product (paint) from tools in container and wash tools with warm soapy water. If the paint is dry, you can only scrub it off with a strong detergent. Do not pour rinse water into ground water.
Storage:
After use, close the container tightly to preserve the paint for future use. Store in a cool place. Keep away from freezing and direct sunlight.
Packaging:
Metal containers with capacities of 750 ml, 3 liters, 20 liters.
According to the European standard the permissible amount of organic solvents in this type of product is 700 g/l. The amount of volatile organic substances in this product - 695 g/l - complies with the European Union requirements for this type of product.
Waste Management:
To avoid environmental pollution, product waste requires special treatment and should not be disposed of with household waste. Please contact your local authorities for more information on waste collection and disposal.
Safety instructions:
Keep out of reach of children. Avoid contact with skin and/or eyes. In case of eye contact, rinse immediately with running water, seek medical advice if necessary. If swallowed, seek medical advice immediately. The workplace should be well ventilated. Wear personal protective equipment during application.