products

Water-based Varnish WATER FLOOR VARNISH 3L
# 14-ΒΠΝ-03

Water-based Varnish WATER FLOOR VARNISH 3L

Water-based Water Floor Varnish, used for interior wood floors and parquet, withstands mechanical loads such as: foot traffic, abrasion, scratching.... See more

Water-based Water Floor Varnish, used for interior wood floors and parquet, withstands mechanical loads such as: foot traffic, abrasion, scratching. It penetrates deeply into pores, ideally protecting the surface. Has a glossy effect. Makes the surface color more vivid and maintains the result for a long time. Certified as an ecologically clean product. We can safely use it in a child's room.

See less

The product is out of stock
Delivery time: 3-5 working days

Coverage: 8-12 sq.m/liter.

Dilution/thinning method: 5-15% water.

Drying: 1-2 hours for second coat.

Final drying: 24 hours.

Color: transparent.

Recommended primer: product diluted 15% in water.

Storage: After use, seal the container hermetically for future use. Store in a cool place. Protect from freezing and direct sunlight.

Packaging: Metal container with volume: 750 ml; 2.5L; 3L.

According to the European standard, the permissible amount of volatile organic substances in this type of product is 30 g/L, in the given product the amount of volatile organic substances - 29 g/L complies with the European Union requirements for this type of product.

Waste Management: To prevent environmental pollution, product waste requires special handling, therefore it cannot be disposed of together with household waste. For additional information on waste collection and disposal, contact local authorities.

Safety Standards: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of contact with eyes, rinse immediately with running water, if necessary consult a doctor. If swallowed, consult a doctor immediately. The work space must be well ventilated. Use personal protective equipment during application.


Ecologically clean. 

Resistant to mechanical loads and scratching.

Usage Instructions: To ensure reliable adhesion of the product, the surface must be clean, dry and free from defects such as adhered (soiled) materials, dust, grease, oil, rust, mold, steam, etc. Pre-apply the recommended primer on the surface Stir the product and apply in 1-2 coats Full resistance to mechanical loads is achieved in 20-30 days.

Application Conditions: Do not use (apply) at temperatures below 6°C and above 40°C, or when relative humidity exceeds 80%. Unfavorable conditions for use may alter the quality properties of the product.

Application Tools: Brush. Roller (paint roller)

During work, keep tools in a container in "wet" condition. After completing the work, wash the tool with warm, soapy water. If the product dries, clean it only with a strong-acting cleaning agent. Do not allow (pour) rinse water into groundwater.


Products offered