Two-component injection solution Foamjet F 20+23kg
- category: Coating waterproofing / Waterproofing
- Brands: MAPEI
Foamjet F is a two-component polyurethane injection solution. Components A and B of Foamjet F must be mixed in a volume ratio of 1:1 using a suitabl... See more
Foamjet F is a two-component polyurethane injection solution. Components A and B of Foamjet F must be mixed in a volume ratio of 1:1 using a suitable pump: the reaction of the two components produces a high-strength polyurethane foam. Due to its flexibility, Foamjet F can penetrate cracks up to one hundred microns in size and seal cracks even if water penetrates them. Once injection is complete, within 3-5 minutes, depending on temperature, Foamjet F becomes completely waterproof and provides adequate waterproofing of the treated structure. In certain conditions where the product requires a faster response than normal, after mixing components A and B, add 0.5-2.5% Foamjet AKS to component A depending on the area where the work is being carried out. Foamjet F complies with the requirements of EN 1504-9 and EN 1504-5.
See less
Product: Component A Component B
20 kg 23 kg
Color: light yellow, dark brown
Consistency: Liquid fluid
Density (g/mL): 1.10 ± 0.03 at +23°C 1.24 ± 0.04 at +23°C
Viscosity: 310 ± 62 at +23°C 290 ± 58 at +23°C
Curing time: 3-5 minutes depending on environment and temperature.
- Reinforcement of water-saturated soil
- Concrete structures
- Cracks in walls
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Two-component injection solution Foamjet F 20+23kg
choose a product
- BUTA Waterproofing Mastic (Rubber Based) 18L
- Fully elastic waterproofing material FOX MULTISEAL FS478 30kg
- Self-adhesive waterproofing tape 7.5x1000 cm - BUTYLSTRIP
- Epoxy Mortar FOX EPOMORTAR FC510
- Waterproofing material R-COMPOSIT 10 KG
- Bitumen waterproofing FOX MULTIPLUS FS540 PLUS 30kg
- Cement-based waterproofing – FOX MULTISEAL FS367 25kg
- Connecting insulation tape FOX MONOTAPE 120/70 mm 50 m
- Rubber-polymer waterproofing-FOX AQUAROOF SR 18kg
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- one-component injection solution 20 kg - Resfoam 1K-M
- FOX GROUT FC155 (R4) 25kg
- fibre cement for levelling concrete surfaces and repair work - Planitop Rasa e Ripara
- Liquid Fibrous Membrane (Grey) – ICOPER HP 20KG GRIGIO
- Transparent polyurethane membrane - BALCONY WATER 10KG
- High-strength tile adhesive – FOX CERAFLEX FX114 GREY 25kg
- Imper Standard (T) V - TKP 4.0 kg/m2, 15 m2
- PVC membrane corner MAPEPLAN EXTERNAL WAVY CORNER PLUS
- Two-component polyurethane waterproofing COMPOSIT CRYSTAL (set)- 6.74KG
- Elastic waterproofing on acrylic base FOX WATERPROF® FS100 20kg
- IMPER BALANCE (Т) Н 3,5 -TPP 3.5 kg / m2, 10 m2
- Aerator 100mm/290mm PG (set)
- Three-layer waterproofing tape FOX TRIPLETAPE 120 50m
- Hydroisol TPP 3.0 (1*10m2)
- mortar - FOX BASEMOR FC205 GRAY 25 kg
- Hydroisol TKP 4.5 (1*10m2)
- Hydrostekloizol EPP - 4.0
- IMPER GARANT Н - 4 kg / m2, EPP 10 m2
- Waterproofing material R-COMPOSIT 10 KG
- Epoxy Mortar FOX EPOMORTAR FC510
Product: Component A Component B
20 kg 23 kg
Color: light yellow, dark brown
Consistency: Liquid fluid
Density (g/mL): 1.10 ± 0.03 at +23°C 1.24 ± 0.04 at +23°C
Viscosity: 310 ± 62 at +23°C 290 ± 58 at +23°C
Curing time: 3-5 minutes depending on environment and temperature.