FOX THERM-ALL® PLAST FT385 -Netting
- category: Heat and sound insulation / წებო-ცემენტი | ფასადი / საარმირე წებო-ცემენტი
- Brands: FOX BAU
FOX THERM-ALL® PLAST FT385 is a cement-based, polymer and inorganic additive-enhanced, fibre-reinforced, ready-to-use general-purpose render that can... See more
FOX THERM-ALL® PLAST FT385 is a cement-based, polymer and inorganic additive-enhanced, fibre-reinforced, ready-to-use general-purpose render that can be applied directly onto thermal insulation boards. It has been developed for use as a surface render in external wall insulation systems. It meets the requirements of TS 13687:2016 and TS EN 998-1:2018 GP, CSIV, WC1, A1, and stands out with excellent adhesion, extended workability and freeze-thaw resistance. Its composition of mineral fillers, synthetic additives and special polymers creates a surface ready for paint or mineral render application.
See less
- Provides excellent adhesion.
- Prevents the formation of surface cracks thanks to fibre reinforcement.
- Easy to prepare and apply.
- Extended working time.
- Creates a surface ready for paint or mineral render application.
- Resistant to freeze-thaw effects.
- Used as a surface render on external wall boards and thermal insulation boards.
- Used for direct rendering of thermal insulation boards.
- Used for coating concrete, prefabricated reinforced concrete elements, cement-bonded particle boards and previously rendered surfaces.
Critical
If the ambient and surface temperature is below +5°C or above +30°C, application must not be carried out; suitable temperatures must be awaited.
Critical
For outdoor applications, the surface must be protected from sunlight, rain, wind and frost for the first 24 hours.
Critical
To allow the material to fully cure, the substrate and ambient temperature must not fall below the permitted minimum temperature.
Important
In cement-based repair mortars, working and reaction times are affected by air temperature, humidity and substrate temperatures. High temperatures accelerate hydration and shorten working time; low temperatures slow hydration and extend working time.
Important
If the rendered surface is to remain unpainted for more than 3 weeks, FOX THERM-ALL® COATPRIM FT110 must be applied immediately.
Important
Opened packaging must be resealed and consumed within 1 week.
Important
The product must be stored at room temperature, away from direct sunlight, between +5°C and +30°C. Shelf life is 12 months from the date of manufacture.
Important
During application, appropriate work clothing, protective gloves, goggles and a mask must be worn in accordance with occupational health and safety regulations.
Critical
Avoid contact with skin and eyes. In case of contact, wash immediately with plenty of water and soap; if swallowed, seek medical attention immediately.
Critical
Approaching storage and application areas with open flames is dangerous. Storage and application areas must be ventilated.
Important
Food and beverages must not be brought into application areas. Store out of reach of children.
Information
The technical values above are given at +23°C and 50% relative humidity. High temperatures shorten the time; low temperatures extend it.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
FOX THERM-ALL® PLAST FT385 -Netting
choose a product
- Slim Premium Wall Sound Insulation Frameless System
- WEBER MIN DEKO 25 KG (Munich) 2მმ
- თბო-ხმის იზოლაცია ISOVER SoundProtect-75x610x1170/Y/C (11.42 კვ/მ)
- Corner profile with mesh Lenix V22F 10x15cm
- Premium Floor Sound Insulation System (floating screed)
- Mapetherm AR1 GG Grey bags 25 kg
- Premium M Ceiling Sound Insulation Frame System
- Noise-insulating box AcousticGyps Box R1
- Standard M1 Ceiling Sound Insulation Frame System
- Penoplex Стена 50*585*1185mm (4.8526 sq.m)
- Basic - ceiling sound insulation frame system
- Slim A Sound Insulation System for Stretch Ceiling
- Stone wool - Ravatherm 120 kg/m3 100x600x1200 mm (1.44 m2)
- Sound insulation mineral wool TechnoSonus SP Floor
- Basic Wall Sound Insulation Frame System
- FOX THERM-ALL® MINPLAST FT377 KA 3 mm
- Mapetherm mortar 25 kg
- Mapetherm AR1 bags 25 kg
- Mapetherm kleber 25 kg
- weber.min LN
- Alfill Mantofil S 25 kg cement dipping adhesive for fiberglass mesh
- WEBER MIN DUO 25 KG
- FOX THERM-ALL® MINPLAST FT377 KA 2 mm
- FOX THERM-ALL® FIX FT383 - Cement-based tile adhesive
- WEBER MIN DEKO 25 KG (Munich) 2მმ
- webertherm SV
- Cement Adhesive Capatect Dämmkleber 181
- Decorative filler (linear) Munich 3mm ALFILL MINERALFIL L100 25kg
- Decorative filler (linear) Munich 2mm ALFILL MINERALFIL L100 25kg
- Alfill Mantofil Y 25 kg cement adhesive for thermal insulation tiles
- Alfill Mantofil S 25 kg cement dipping adhesive for fiberglass mesh
- Mapetherm AR1 bags 25 kg
- webertherm SV
- Mapetherm mortar 25 kg
- Capatect Klebe und Armierungsmasse 186M - 25kg