products

FOX THERM-ALL® FIX FT383 -  Cement-based tile adhesive
# FT383

FOX THERM-ALL® FIX FT383 - Cement-based tile adhesive

FOX THERM-ALL® FIX FT383 is a polymer-modified, cement-based thermal insulation board adhesive composed of mineral fillers, synthetic additives, and s... See more

FOX THERM-ALL® FIX FT383 is a polymer-modified, cement-based thermal insulation board adhesive composed of mineral fillers, synthetic additives, and special polymers. Its formulation, tailored to the structure of polystyrene materials, ensures strong adhesion to EPS and XPS boards. The product meets the TS 13566 standard and is used for bonding thermal insulation boards to reinforced concrete and plastered surfaces. It is available in Grey and White. The reaction-to-fire classification is A1 in accordance with TS EN 13501-1. The material can be applied at thicknesses of 3–10 mm and must be used at ambient and surface temperatures between +5°C and +30°C.

See less

Product is in stock
Price 20.50o
Delivery time: 3-5 working days

  • Easy to prepare and apply.
  • Non-slip.
  • Excellent adhesion.
  • Long working time.
  • Rapid strength gain.
  • Resistant to freeze-thaw cycles.

  • Used for bonding thermal insulation boards to reinforced concrete and plastered surfaces.

Critical

After FOX THERM-ALL® FIX FT383 has been applied to the façade, it must be mechanically fastened using suitable dowels for the surface.

Critical

If the ambient or surface temperature is below +5°C or above +30°C, application must not be carried out; wait until suitable temperatures are reached.

Critical

For outdoor applications, the surface must be protected from sunlight, rain, wind, and frost for the first 24 hours.

Important

While positioning the boards, the adhesive on the board surface must not be allowed to dry and form a film layer.

Important

FOX THERM-ALL® FIX FT383 must be in contact with a minimum of 40% of the board surface.

Important

Working and reaction times of cement-based repair mortars are affected by air temperature, humidity, and substrate temperature. High temperatures accelerate hydration; low temperatures slow it down.

Important

Surfaces to be treated must be sound and free from all dust and dirt. Areas requiring repair must be repaired with INNO-CRETE series repair mortars at least 24 hours in advance.

Important

The product must be stored in its original unopened packaging in a dry, cool environment (between +5°C and +30°C), protected from sunlight and frost. Shelf life is 12 months from the date of manufacture. Opened packaging must be consumed within 1 week.

Critical

Avoid contact with skin and eyes during storage and application. In case of contact, wash thoroughly with plenty of water and soap. If swallowed, seek medical attention immediately.

Important

Wear work clothing, protective gloves, goggles, and a mask during application. Store out of reach of children.

Information

The technical values above were measured at +23°C and 50% relative humidity.


Products offered