products

FOX THERM-ALL® MINPLAST FT377 KA 3 mm
# FT3773

FOX THERM-ALL® MINPLAST FT377 KA 3 mm

FOX THERM-ALL® MINPLAST FT377 is a cement-based, polymer-reinforced decorative mineral render mortar composed of mineral fillers, synthetic additives... See more

FOX THERM-ALL® MINPLAST FT377 is a cement-based, polymer-reinforced decorative mineral render mortar composed of mineral fillers, synthetic additives and special polymers. It is used indoors and outdoors, on building facades as a decorative coating over thermal insulation render, and on mineral-based surfaces such as concrete and plaster. The product meets TS EN 998-1/GP, CSIII, Wc1, A1 standards and is available in KA grain texture (1.5 mm, 2.0 mm, 3.0 mm, 4.0 mm) and MR scratch pattern (1.5 mm fine and 2.0–3.0 mm coarse) options. In addition to manual application, machine (spray) application is also possible. After application, tools and equipment can be cleaned with water; hardened material can only be removed mechanically.

See less

Product is in stock
Price 33.00o
Delivery time: 3-5 working days

  • Provides excellent adhesion.
  • Can be painted in any desired colour.
  • Easy to prepare and apply.
  • Long working time.
  • Allows water vapour diffusion.
  • High mechanical resistance against external factors.
  • Resistant to freeze–thaw cycles.

  • Indoors and outdoors
  • As a decorative coating over thermal insulation render on building facades
  • On mineral-based surfaces such as concrete and plaster

Critical

If the ambient and surface temperature during application is below +5°C or above +30°C, application must be postponed until suitable temperatures are reached.

Critical

For outdoor applications, the applied surface must be protected from sunlight, rain, wind and frost for the first 24 hours.

Critical

To allow the material to cure fully, the substrate temperature and ambient temperature must not fall below the permitted minimum temperature.

Important

Working and reaction times of cement-based repair mortars are affected by air temperature, humidity and substrate temperature. High temperatures accelerate hydration and shorten working time; low temperatures slow hydration.

Important

The product must be stored in its original unopened packaging in a dry, cool environment (between +5°C and +30°C), protected from sunlight and frost. Shelf life is 12 months from the date of manufacture. Opened packaging must be consumed within 1 week.

Critical

Open flames near storage and application areas are dangerous; these areas must be ventilated.

Important

During application, appropriate work clothing, protective gloves, goggles and a mask must be worn in accordance with occupational health and safety regulations.

Critical

During storage and application, contact with skin and eyes must be avoided; in case of contact, wash thoroughly with plenty of water and soap; if swallowed, seek medical attention immediately.

Important

Food and beverages must not be brought into application areas. Store out of reach of children.

Information

For detailed information, refer to the Safety Data Sheet (Material Safety Data Sheet).


Products offered