Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- category: Additive to concrete
- Brands: MAPEI
TECHNICAL CHARACTERISTICS Mapeform DMA 2000 consists of specially selected oils, corrosion inhibitors, and special admixtures developed... See more
TECHNICAL CHARACTERISTICS Mapeform DMA 2000 consists of
specially selected oils, corrosion inhibitors, and special admixtures developed in the MAPEI Research & Development Laboratories. Mapeform DMA 2000 owes its effectiveness to physical action of conventional form release agents, which counter-act adhesion of concrete to forms, and to chemical reaction with cement paste in contact with forms that creates a very thin insulating lm. Mapeform DMA 2000’s chemical properties absolutely guarantee efcient separation of the two elements. Mapeform DMA 2000 features the following benets: · better surface nish; · no surface dusting; · no grease stains, even with white cements; · less cleaning of forms; · simple low-cost application.
See less
WHERE TO USE Anti-adhesive treatment of iron, aluminium, wood and
plastic forms (epoxy and phenolic resins, polyesters, polyurethanes). Some application examples To facilitate form release of: · precast concrete; · steam-cured concrete; · concrete cast in plastic forms; · concrete cast in cement or gypsum forms; · concrete cast in metal forms.
Products offered
MAPEFAST CF 12 - 1200 kg (antifreeze)
- category: Additive to concrete / Antifreeze
- Brands: MAPEI
Air-entraining plasticizer concrete admixture Mapeair AE 2 – 5 kg
- category: Additive to concrete
- Brands: MAPEI
Liquid concrete admixture MAPEFAST CF 12 – 35 kg
- category: Additive to concrete / Antifreeze
- Brands: MAPEI
Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Concrete admixture plasticizer Dynamon SX32 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
delivery
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available."
Delivery time:
- Tbilisi
Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
choose a product
- ARSET KUR AC - 200 kg
- MAPEFAST CF 12 - 1200 kg (antifreeze)
- ARSTEP EXTRA 355 S Cons - 30 kg
- FOX SEALPLUS FM501
- Air-entraining plasticizer concrete admixture Mapeair AE 2 – 5 kg
- Liquid concrete admixture MAPEFAST CF 12 – 35 kg
- Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- Concrete admixture plasticizer Dynamon SX32 – 25 kg
- ARSET FRIZ 100 - 30 კგ
- ARSET KRISTALIZE - 30 kg
- FOX ALPHACOAT FF900 (5 LITER)
- ARSET FRIZ 100 - 1100კგ
- Concrete admixture VINMIX – 5 L
- FOX SEALPLUS FM502 (20KG)
- FOX SEALPLUS FM501 (20KG)