Mapetard /25 კგ
- category: Additive to concrete
- Brands: MAPEI
TECHNICAL CHARACTERISTICS Mapetard is a water solution of active polymers that retard cement hydration and limit slump loss in concrete during hot wea... See more
TECHNICAL CHARACTERISTICS Mapetard is a water solution of
active polymers that retard cement hydration and limit slump loss in concrete during hot weather and when transporting over long distances. Retention of workability and delay in setting increase the dosage of the admixture, which can vary from 0.2% to 0.5% by weight of cement.
See less
WHERE TO USE Mapetard is especially recommended for
applications which require a good workability retention and a retarded rate of cement hydration at early ages. Mapetard is mainly used for: · ready-mixed concrete (especially in hot weather); · pumped concrete; · mass concrete; · retarded cementitous mortars. Some application examples Mapetard is especially recommended for: · ready-mixed quality concrete; · mass concrete pours where it is necessary to reduce thermal peaks generated by the development of heat by hydration: dams, foundations, etc; · ready-mixed mortars that can be used 24 to 48 hours after mixing.
Products offered
Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- category: Additive to concrete
- Brands: MAPEI
Liquid concrete admixture MAPEFAST CF 12 – 35 kg
- category: Additive to concrete / Antifreeze
- Brands: MAPEI
Concrete admixture plasticizer Dynamon SX32 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
FOX HARTOP FF300 NATURAL GREY (25KG)
- category: Additive to concrete
- Brands: FOX BAU
Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Waterproofing concrete admixture ARSET KRISTALIZE – 200 kg
- category: Additive to concrete
Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- category: Additive to concrete
- Brands: MAPEI
MAPEFAST CF 12 - 1200 kg (antifreeze)
- category: Additive to concrete / Antifreeze
- Brands: MAPEI
Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
delivery
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available."
Delivery time:
- Tbilisi
Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Mapetard /25 კგ
choose a product
- FOX ALPHACOAT FF900 MATTE (5 LITER)
- Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- FOX SEALPLUS FM501 (20KG)
- Liquid concrete admixture MAPEFAST CF 12 – 35 kg
- Concrete admixture plasticizer Dynamon SX32 – 25 kg
- ARSET FRIZ 100 - 1100კგ
- FOX HARTOP FF300 NATURAL GREY (25KG)
- Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- FOX SEALPLUS FM502 (20KG)
- Waterproofing concrete admixture ARSET KRISTALIZE – 200 kg
- Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- ARSET KUR AC - 200 kg
- FOX ALPHACOAT FF900 (5 LITER)
- MAPEFAST CF 12 - 1200 kg (antifreeze)
- Superplasticizer concrete admixture Mapeplast N10 – 25 kg