Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Mapeplast N10 is a water solution of active polymers which disperse cement granules with the secondary effect to improve the cohesion and t... See more
Mapeplast N10 is a water solution of
active polymers which disperse cement granules with the secondary effect to improve the cohesion and the pumpability of concrete.
See less
WHERE TO USE Mapeplast N10 is recommended for concrete with
medium compressive strength (R 20-30 MPa). Mapeplast N10 is especially recommended for applications which require a retarded rate of cement hydration at early ages. Its principal uses are for:▪ ready-mixed concrete (especially in hot weather);▪ pumped concrete;▪ mass concrete. Some application examples In addition to its plasticising effect, Mapeplast N10 has a slight retarding action on the hydration of cement and is therefore especially recommended for:▪ ready-mixed quality concrete for structures with a compressive strength higher than 20 MPa;▪ ready-mixed concrete for watertight structures (with a water/cement ratio no higher than 0.55): purication plants, reservoirs, canals, tunnels, etc;▪ mass concrete structures where it is necessary to reduce thermal peaks caused by the heat generated in cement hydration: dams, foundations-mats for high-rise buildings, etc.
Products offered
Concrete admixture FOX ADFREEZE FM101
- category: Plasticizer / Additive to concrete
- Brands: FOX BAU
Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- category: Additive to concrete
- Brands: MAPEI
MAPEFAST CF 12 - 1200 kg (antifreeze)
- category: Additive to concrete / Antifreeze
- Brands: MAPEI
Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- category: Additive to concrete
- Brands: MAPEI
FOX ALPHACOAT FF900 (5 LITER)
- category: Additive to concrete
- Brands: FOX BAU
Concrete admixture plasticizer Dynamon SX32 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Waterproofing concrete admixture ARSET KRISTALIZE – 200 kg
- category: Additive to concrete
Concrete admixture ARSET KRISTALIZE – 1100 kg
- category: Additive to concrete
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Superplasticizer concrete admixture Mapeplast N10 – 25 kg
choose a product
- Concrete admixture FOX ADFREEZE FM101
- FOX POLIFIBER M12 (600 gram)
- Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- FOX SEALPLUS FM501 (20KG)
- FOX SEALPLUS FM502 (20KG)
- MAPEFAST CF 12 - 1200 kg (antifreeze)
- Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- ARSET KRISTALIZE - 30 kg
- FOX ALPHACOAT FF900 (5 LITER)
- Concrete admixture VINMIX – 5 L
- Concrete admixture plasticizer Dynamon SX32 – 25 kg
- Waterproofing concrete admixture ARSET KRISTALIZE – 200 kg
- Concrete admixture ARSET KRISTALIZE – 1100 kg
- ARSET KUR AC - 200 kg