Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
- category: Additive to concrete
- Brands: MAPEI
TECHNICAL CHARACTERISTICS Mapeform DMA 2000 consists of specially selected oils, corrosion inhibitors, and special admixtures developed... See more
TECHNICAL CHARACTERISTICS Mapeform DMA 2000 consists of
specially selected oils, corrosion inhibitors, and special admixtures developed in the MAPEI Research & Development Laboratories. Mapeform DMA 2000 owes its effectiveness to physical action of conventional form release agents, which counter-act adhesion of concrete to forms, and to chemical reaction with cement paste in contact with forms that creates a very thin insulating lm. Mapeform DMA 2000’s chemical properties absolutely guarantee efcient separation of the two elements. Mapeform DMA 2000 features the following benets: · better surface nish; · no surface dusting; · no grease stains, even with white cements; · less cleaning of forms; · simple low-cost application.
See less
WHERE TO USE Anti-adhesive treatment of iron, aluminium, wood and
plastic forms (epoxy and phenolic resins, polyesters, polyurethanes). Some application examples To facilitate form release of: · precast concrete; · steam-cured concrete; · concrete cast in plastic forms; · concrete cast in cement or gypsum forms; · concrete cast in metal forms.
Products offered
MAPEFAST CF 12 - 1200 kg (antifreeze)
- category: Additive to concrete / Antifreeze
- Brands: MAPEI
Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- category: Additive to concrete
- Brands: MAPEI
Concrete admixture FOX ADFREEZE FM101
- category: Plasticizer / Additive to concrete
- Brands: FOX BAU
Air-entraining plasticizer concrete admixture Mapeair AE 2 – 5 kg
- category: Additive to concrete
- Brands: MAPEI
Concrete admixture plasticizer Dynamon SX32 – 25 kg
- category: Additive to concrete
- Brands: MAPEI
Waterproofing concrete admixture ARSET KRISTALIZE – 200 kg
- category: Additive to concrete
Concrete admixture ARSET KRISTALIZE – 1100 kg
- category: Additive to concrete
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Protective release acrylic coating for plastic formwork Mapeform DMA 2000 – 8.6 kg
choose a product
- FOX SEALPLUS FM501 (20KG)
- FOX POLIFIBER M12 (600 gram)
- MAPEFAST CF 12 - 1200 kg (antifreeze)
- Set-retarding plasticizer concrete admixture Mapecure E – 25 kg
- Superplasticizer concrete admixture Mapeplast N10 – 25 kg
- FOX SEALPLUS FM502 (20KG)
- Acrylic form release coating for wood Mapeform DMA 1000 – 4.5 kg
- Concrete admixture FOX ADFREEZE FM101
- ARSTEP EXTRA 355 S Cons - 30 kg
- Air-entraining plasticizer concrete admixture Mapeair AE 2 – 5 kg
- Concrete admixture plasticizer Dynamon SX32 – 25 kg
- Concrete admixture VINMIX – 5 L
- Waterproofing concrete admixture ARSET KRISTALIZE – 200 kg
- ARSET KRISTALIZE - 30 kg
- Concrete admixture ARSET KRISTALIZE – 1100 kg