Cement and concrete waste cleaner F-24 BETOCLEAN 1LT
- category: Household chemicals / Repair materials
- Brands: CHROMODOMI
Water-based powerful acidic cleaner. Contains phosphoric and hydrochloric acids. Dissolves and removes lime, cement, rust and concrete deposits... See more
Water-based powerful acidic cleaner. Contains phosphoric and hydrochloric acids. Dissolves and removes lime, cement, rust and concrete deposits from solid stone, granite and all types of metal surfaces. Removes construction residues from tools. Removes rust stains caused by tools used during cutting. Objects such as painted surfaces and metals (door wood details, aluminum, etc.) must be protected with covering.
- Packaging: 500ml, 1L, 5L, 18L.
See less
English: ATTENTION: "Underfloor heating" must be turned off 12 hours before application. The surface must be wetted before application.
- According to the type and density of contamination, the product is used concentrated or diluted in a ratio of up to 1:5, and applied to the surface.
- Use a brush manually or mechanically until the contamination dissolves. After cleaning, remove foam residues with a sponge or water vacuum. Wait for drying. On absorbent surfaces such as natural stone, concrete, etc., it is recommended to apply an appropriate protective layer.
- Cleaning of construction tools (trowel, spatula, etc.), concrete mixer and other instruments is done manually with a 1:3 - 1:5 ratio water solution, with 4-6 hours delay. Finally, rinse thoroughly with clean water.
PROHIBITED FOR USE: on acid-sensitive tiles, polished natural stone, enamel, concrete and other similar surfaces. Materials such as aluminum, chrome, iron, stainless steel must be covered before use. Ventilation is required. Testing is recommended before use. Consumption: 100-200 ml/m²
SAFETY STANDARDS: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of eye contact, immediately rinse with running water, consult a doctor if necessary. In case of ingestion, immediately consult a doctor. Work area must be well ventilated. Use personal protective equipment during application.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 150 GEL, the delivery price is 40 GEL;
- When purchasing products in the amount of 151 to 350 GEL, the delivery price is 50 GEL;
- When purchasing products worth more than GEL 351, the delivery price is 60 GEL;
- Materials categorized under metal are subject to the following tariff structure: a base fee of 70 GEL, supplemented by a mileage rate of 5 GEL per kilometer.
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
*Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Cement and concrete waste cleaner F-24 BETOCLEAN 1LT
choose a product
- /Floor detergent -oranit (1000 ml)
- Furniture detergent) - Rahitit (750ml)
- Embossed baseboard U50/50M
- Classic ceiling baseboard A20/20
- NEOMID 600
- Classic ceiling baseboard H65/80
- white grout WEBER JOINT SIL 400-BEYAZ 2 kg
- Classic ceiling baseboard H30/35
- Self-tapping hexagon screw BWS-55038 (12pcs)
- Concrete Contact WEBER PRIM BT MAX 25 KG
- Web-cement Alfill Teknofix - 25kg, frost-resistant, for small-sized tiles
- Classic ceiling baseboard I110/110
- black grout WEBER JOINT SIL 413-SIYAH 2 KG
- Self-leveling Floor weber floor lvl 1010 25 KG
- Toilet bracket white BKMMX-10080B (2 pcs)
- Molding M 40/15
- clips 250 pcs 2 mm
English: ATTENTION: "Underfloor heating" must be turned off 12 hours before application. The surface must be wetted before application.
- According to the type and density of contamination, the product is used concentrated or diluted in a ratio of up to 1:5, and applied to the surface.
- Use a brush manually or mechanically until the contamination dissolves. After cleaning, remove foam residues with a sponge or water vacuum. Wait for drying. On absorbent surfaces such as natural stone, concrete, etc., it is recommended to apply an appropriate protective layer.
- Cleaning of construction tools (trowel, spatula, etc.), concrete mixer and other instruments is done manually with a 1:3 - 1:5 ratio water solution, with 4-6 hours delay. Finally, rinse thoroughly with clean water.
PROHIBITED FOR USE: on acid-sensitive tiles, polished natural stone, enamel, concrete and other similar surfaces. Materials such as aluminum, chrome, iron, stainless steel must be covered before use. Ventilation is required. Testing is recommended before use. Consumption: 100-200 ml/m²
SAFETY STANDARDS: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of eye contact, immediately rinse with running water, consult a doctor if necessary. In case of ingestion, immediately consult a doctor. Work area must be well ventilated. Use personal protective equipment during application.