Exterior primer ULTRA PRIMER 10LT
- category: CHROMODOMI / Exterior paint
- Brands: CHROMODOMI
Special water-based primer for exterior work before the last coat, with a high degree of covering power. The primer cures the already applied adhesive... See more
Special water-based primer for exterior work before the last coat, with a high degree of covering power. The primer cures the already applied adhesive, so the last coat will be applied perfectly, reduces the cost of plastering works, completely covers the adhesive and ensures uniformity of painting. Suitable for any top coat of plaster of your choice (acrylic, silicone, granite, etc)
See less
- Color: available in white and in many colors thanks to our painting system.
- Packaging: 5 kg; 15 kg.
Application area:
Surface preparation:
- The surface must be clean, dry and free from defects such as sticky materials, dust, grease, oil, rust, moss, steam, etc. to ensure a good adhesion of the product.
- Apply the primer with a brush or roller and wait for it to dry for 1-2 hours.
- Then apply the top coat
- Reaches full resistance to mechanical loads after 20-30 days.
Operating conditions:
- Do not apply at temperatures below 6 °C and above 40 °C and relative humidity above 80%. Unfavorable conditions of use may change the quality properties of the product.
Application tools:
- Brush
- Roller (roller).
Keep the tools in the container "wet" during work. Completely drain the paint from the tools back into the container and wash the tools with warm water and soap. If the paint has dried, only scrub it off with a strong detergent. Do not allow used water to reach groundwater.
- Consumption: 18 - 22 m2/kg per one layer;
- Dilution: 5-10% of water;
- Drying time: 1-2 hours, depending on application conditions;
Safety rules: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of contact with eyes, rinse immediately with running water, if necessary consult a doctor. In case of swallowing, seek medical advice immediately. The working area should be well ventilated. Wear personal protective equipment during application.
Waste Management:
- In order not to pollute the environment, production waste requires special treatment. Therefore, do not dispose of them together with household waste. For more information on waste collection and disposal, contact the local authorities.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Exterior primer ULTRA PRIMER 10LT
choose a product
- MARTELE HAMMERED 2,5LT (paint with hammered effect)
- Silicone Paint for Facade LIFE SIL 10LT
- Эмульсионная краска НАТУРА-ЛАТЕКС (1л. 3л. 9л. 15л)
- Silicone paint Cover Sil 16 LT
- WOOD CARE-W Νο914 GREEN (ხის ზედაპირის დამცავი)
- Ceiling paint HYDROCHROMA ULTRA
- MARTELE HAMMERED 0,75LT (paint with hammered effect)
- Gloss enamel paint – STEP-LAC 0.75 L
- Silicone paint Cover Sil (base TR)
- CHASSIS COAT 2.5LT corrosion protection enamel paint
- Varnish for stone and concrete. Smooth. STONE VARNISH WATER MATT 2,5LT
- ნიტრო გამხსნელი THINNER 0,75LT
- WOOD CARE-W Νο909 DARK CHESNUT (ხის ზედაპირის დამცავი )
- Silicone paint Cover Sil (base D)
- Silicone Facade Paint LIFE SIL (BASE D) 10LT
- Facade Paint – Chrome Fasad 25 kg C
- Chrome Fasad 10 kg B2
- Semi-finished adhesive for polystyrene and all types of cement materials POLY GLUE 15KG
- Facade Paint – Chrome Fasad 10 kg B3
- Facade Paint – Chrome Fasad 10 kg C
- Silicone paint Cover Sil (base TR)
- Silicone Facade Paint LIFE SIL (BASE D) 10LT
- Silicone paint Cover Sil 16 LT
- Elastomeric cement-based paint – LIFE ACRYL FIBER ELASTIC WHITE
- STEP PRIMER (primer based on acrylic emulsion)
- Silicone paint Cover Sil (base D)
- Chrome Fasad 3.5 kg B2
- Silicone paint Cover Sil 16 LT (base P)
- Facade Paint – Chrome Fasad 3.5 kg A
- Chrome Fasad 3.5 kg B1
- Color: available in white and in many colors thanks to our painting system.
- Packaging: 5 kg; 15 kg.
Application area:
Surface preparation:
- The surface must be clean, dry and free from defects such as sticky materials, dust, grease, oil, rust, moss, steam, etc. to ensure a good adhesion of the product.
- Apply the primer with a brush or roller and wait for it to dry for 1-2 hours.
- Then apply the top coat
- Reaches full resistance to mechanical loads after 20-30 days.
Operating conditions:
- Do not apply at temperatures below 6 °C and above 40 °C and relative humidity above 80%. Unfavorable conditions of use may change the quality properties of the product.
Application tools:
- Brush
- Roller (roller).
Keep the tools in the container "wet" during work. Completely drain the paint from the tools back into the container and wash the tools with warm water and soap. If the paint has dried, only scrub it off with a strong detergent. Do not allow used water to reach groundwater.
- Consumption: 18 - 22 m2/kg per one layer;
- Dilution: 5-10% of water;
- Drying time: 1-2 hours, depending on application conditions;
Safety rules: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of contact with eyes, rinse immediately with running water, if necessary consult a doctor. In case of swallowing, seek medical advice immediately. The working area should be well ventilated. Wear personal protective equipment during application.
Waste Management:
- In order not to pollute the environment, production waste requires special treatment. Therefore, do not dispose of them together with household waste. For more information on waste collection and disposal, contact the local authorities.