MARTELE HAMMERED 2,5LT (paint with hammered effect)
- category: CHROMODOMI / მეტალის ნიტრო საღებავები
- Brands: CHROMODOMI
Enamel paint based on special synthetic resins. Protects and gives the surface the appearance of ground metal. It is used for pain... See more
Enamel paint based on special synthetic resins. Protects and gives the surface the appearance of ground metal. It is used for painting metal surfaces, tools and fixtures. It has high adhesion and dries quickly.
- Colors: 12 chromodomi colors are available;
- Packaging: 750 ml; 2.5 liters.
See less
Surface Preparation:
- To ensure proper adhesion of the product, the surface must be clean, dry and free of any defective or adhering materials, dust, grease, oil, rust, moss and/or moisture and similar interfering factors.
- Apply a primer to the surface.
- Mix the product thoroughly and apply to the surface.
- The product reaches full mechanical strength in 20-30 days.
Conditions of use:
- Do not use at temperatures below 6°C and above 40°C with humidity greater than 80%. Unfavorable conditions may alter the final properties of the product.
Carrying tools:
- Brush.
- Roller.
Keep tools in container in “wet” condition during operation. Pour product (paint) from tools into a container and rinse tools with white spirit. If the paint is dry, you can only scrub it off with a strong detergent. Do not pour detergent into ground water.
Consumption: 8 - 10 m2/liter on properly prepared surface;
Dilution: 1 - 5% nitro solvent;
Drying time: 20 - 40 minutes, depending on application conditions;
Storage: After use, close the container tightly and store for future use. Store in a cool place. Protect from freezing and direct sunlight.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
MARTELE HAMMERED 2,5LT (paint with hammered effect)
choose a product
- WOOD CARE-W 2,5LT (protection agent for wooden surfaces)
- MARTELE HAMMERED 0,75LT (paint with hammered effect)
- Varnish for stone and concrete. STONE VARNISH WATER 2,5Lt
- Enamel paint for bathroom and tile TILE PAINT (base D) 2.5 l
- Эмульсионная краска НАТУРА-ЛАТЕКС (1л. 3л. 9л. 15л)
- WOOD CARE-W Νο903 WALNUT LIGHT (ხის ზედაპირის დამცავი)
- Silicone paint Cover Sil 16 LT (base P)
- Emulsion paint COVER-LATEX (BASE D) 16L
- Silicone Facade Paint LIFE SIL (BASE D) 10LT
- METAL PRIMER (GREY) (anti-corrosion primer for metal surfaces)
- Silicone Facade Paint LIFE SIL (BASE TR) 10LT
- BLACKBOARD PAINT BLACK 0,75LT
- WOOD CARE 0.75LT (protection agent for wooden surfaces)
- Varnish for stone and concrete. Smooth. STONE VARNISH WATER MATT 2,5LT
- Emulsion paint COVER-LATEX (BASE P) (1L. 3L. 9L. 16L)
- : MASTER CELLULOSIC GLOSSY TOP COAT PAINT Master Sell Parlaq #1001 0,8 kg
- Nitroemal paint
- Enamel nitro paint MOTOR LAC 0.75LT
- Nitroemal paint
- MARTELE HAMMERED 0,75LT (paint with hammered effect)
- Nitroemal paint
- Enamel nitro paint MOTOR LAC 2.5LT
- Nitroemal paint
- Enamel nitro paint Master Sell Parlaq #5602 2.5 kg
- Nitroemal paint
- Nitroemal paint
- Nitroemal paint
- Nitroemal paint
- Nitroemal paint
- Nitroemal paint
Surface Preparation:
- To ensure proper adhesion of the product, the surface must be clean, dry and free of any defective or adhering materials, dust, grease, oil, rust, moss and/or moisture and similar interfering factors.
- Apply a primer to the surface.
- Mix the product thoroughly and apply to the surface.
- The product reaches full mechanical strength in 20-30 days.
Conditions of use:
- Do not use at temperatures below 6°C and above 40°C with humidity greater than 80%. Unfavorable conditions may alter the final properties of the product.
Carrying tools:
- Brush.
- Roller.
Keep tools in container in “wet” condition during operation. Pour product (paint) from tools into a container and rinse tools with white spirit. If the paint is dry, you can only scrub it off with a strong detergent. Do not pour detergent into ground water.