Emulsion paint NATURA-LATEX WHITE
- category: CHROMODOMI / Interior paint
- Brands: CHROMODOMI
High quality emulsion paint for interior work.Provides excellent hiding power and stable whiteness, which makes it ideal for walls, ceilings,war... See more
High quality emulsion paint for interior work.
Provides excellent hiding power and stable whiteness, which makes it ideal for walls, ceilings,
warehouses and other areas requiring frequent painting.
See less
- Color: Available in white and unlimited colors from the Chromodomi catalog.
Application area:
Surface preparation:
- The surface must be clean, dry and free of defects such as adhered materials, dust, grease, oil, rust,
moss, vapor, etc. to ensure reliable adhesion of the product.
- On new or porous surfaces, apply the recommended primer (primer, waterproofing, filler) in advance.
- Mix the product thoroughly and apply in 2 coats.
- It reaches full resistance to mechanical stress after 20-30 days.
Operating conditions:
- Do not use (apply) at temperatures below 6 °C and above 40 °C and relative humidity above 80%.
Unfavorable operating conditions may change the quality properties of the product.
- brush.
- roller
- spray
Keep the tools in the container in a “wet” condition while working. Collect all product (paint) from the
tools in the container and rinse the tools with warm soapy water. If the product (paint) dries, it can only
be scrubbed off with a strong detergent. Do not pour the used water into groundwater.
- Consumption: 8-10 m2/liter per coat;
- Dilute: for the first coat - 15% water; For the second coat - 5-10% water;
- Drying time: 1-2 hours depending on application conditions;
Precautions: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of contact with
eyes, rinse immediately with running water, seek medical attention if necessary. If swallowed, seek
medical advice immediately. The workplace should be well ventilated. Wear personal protective
equipment during application.
- The amount of VOCs 27 g/l complies with the EU requirements for this type of product.
- Waste management:
In order not to pollute the environment, product waste requires special recycling. Therefore, do not
dispose of them together with household waste. Please contact your local authorities for more
information on waste collection and disposal.
Storage: After use, close the container tightly and store for future use. Store in a cool place. Keep away
from freezing and direct sunlight.
The entry “EL.OT * 7.88” refers to the characterization of the paint and is part of the Greek standard for
the definition of paint properties.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Emulsion paint NATURA-LATEX WHITE
choose a product
- Enamel paint for bathroom and tile TILE PAINT (base D) 2.5 l
- CHASSIS COAT 2.5LT corrosion protection enamel paint
- Acrylic paint NATURA-ACRYL (1L. 3L. 9L. 15L)
- Acrylic paint for facades COVER-ACRYL WHITE
- STEP PRIMER (primer based on acrylic emulsion)
- MARTELE HAMMERED 2,5LT (paint with hammered effect)
- WOOD CARE-W Νο905 ROSEBUSH (ხის ზედაპირის დამცავი )
- Semi-finished adhesive for polystyrene and all types of cement materials POLY GLUE 15KG
- Wood Surface Protector - WOOD CARE No800 Transparent 2.5LT
- Emulsion Paint for Interior Work STEP-LATEX HIGH LEVEL (BASE P) 10LT
- Water-based wood varnish, glossy WATER RED-SUN CLEAR 0,75LT
- Emulsion paint for interior work STEP-LATEX HIGH LEVEL WHITE 10LT
- Enamel nitro paint MOTOR LAC 0.75LT
- Ceiling paint HYDROCHROMA ULTRA
- Silicone paint Cover Sil (base D)
- Primer for plasterboard - STEP PLASTER PRIMER
- Эмульсионная краска НАТУРА-ЛАТЕКС (1л. 3л. 9л. 15л)
- Emulsion paint for interior work STEP-LATEX HIGH LEVEL WHITE 10LT
- საღებავი წყალდისპ.შიდა სამუშ. STEP-LATEX HIGH LEVEL (BASE D) 3LT
- საღებავი წყალდისპ.შიდა სამუშ. STEP-LATEX HIGH LEVEL (BASE TR) 0,90LT
- საღებავი წყალდისპ.შიდა სამუშ. STEP-LATEX HIGH LEVEL (BASE P) 0,97LT
- Interior Paint – Chrome Plastik 25 kg C
- Emulsion paint COVER-LATEX (BASE P) (1L. 3L. 9L. 16L)
- საღებავი წყალდისპ.შიდა სამუშ. STEP-LATEX HIGH LEVEL (BASE TR) 3LT
- Ceiling paint HYDROCHROMA ULTRA
- Interior Paint – Chrome Plastik 25 kg B
- Master Plastik 10 kg
- Emulsion paint COVER-LATEX WHITE
- STEP PRIMER (primer based on acrylic emulsion)
- Emulsion Paint for Interior Work STEP-LATEX HIGH LEVEL (BASE P) 10LT
- Color: Available in white and unlimited colors from the Chromodomi catalog.
Application area:
Surface preparation:
- The surface must be clean, dry and free of defects such as adhered materials, dust, grease, oil, rust,
moss, vapor, etc. to ensure reliable adhesion of the product.
- On new or porous surfaces, apply the recommended primer (primer, waterproofing, filler) in advance.
- Mix the product thoroughly and apply in 2 coats.
- It reaches full resistance to mechanical stress after 20-30 days.
Operating conditions:
- Do not use (apply) at temperatures below 6 °C and above 40 °C and relative humidity above 80%.
Unfavorable operating conditions may change the quality properties of the product.