ემალის ნიტრო საღებავი Master Sell Parlaq #1002 2,5 kg

Properties: It is resistant to physical impacts, scratches and abrasions, does not fade, has good adhesion to the surface it is applied to, is bright and air-dries quickly

Color: White, Burgundy, Grey, Brown, Red, Yellow, Black, Dark Blue, Green

Specifications:

Connector Type: Nitrocellulose / Alkyd resin.

Viscosity (23°C, KU): 180- 200

Density (g/ml) :  0.98 ± 1.080

Solids (wt,%): 36-49 (Depending on color)

Brightness (Gloss, 60°) : 50-80

Flammability Degree (°C) : <21

Surface capacity (Theoretical) : 12 m²/l(30µ dry film thickness)

Surface capacity (Practical): 8-10 m²/l(single layer)

       8-10 m²/ kg (single layer)

Recommended layers: Two layers  

Drying time (23°C,%50RR) : Touch     : 15-20 min

    Dust retention: 30 min

   Complete drying: 4-6 hours

Dilution factor : 15-20% with coefficent diluted with Master Cellulose Thinner. (Depending on application requirements).

-These figures are given for conditions of + 23 ± 2 ºC and relative humidity 50 ± 5%.

Surface preparation:

Surfaces to be applied must be clean, dry, free of dust and rust. Wood surfaces should be primed with Cellulosic MDF Primer and metal surfaces - with Cellulosic Metal Primer. Old painted surfaces can be painted after sanding and removing dust.

Application:

Only 12 hours after application of the primer, depending on the application requirements Master Cellulose Glossy Top Coat Paint is diluted 15-20% with Master Cellulose Thinner and two coats are applied with using a spray bottle.

Consumption:

1 kg. Master Cellulose Glossy Top Coat Paint can be applied in one coat to a surface of 8-10 m.

Storage period:

Can be stored in closed original packaging at a temperature of 5-35 °C out of direct sunlight for up to 3 years. Must be protected from excessive moisture and heat.

Safety Warnings:

• Master Cellulose Glossy Top Coat Paint should be mixed thoroughly before use.
• The ambient temperature should be 5-35°C during use.
• Tools should be cleaned after each use with Master Cellulose Thinner.
• Surfaces after application of Master Cellulose Glossy Top Coat Paint must be protected from physical and chemical exposure for 12 hours.
• Paint must not enter drains or water channels.
• Usage should be as stated above.
• For more health and safety information, see the Safety Guide.

Warning:

R 11: Very combustible.

R 20/21/22 : dangerous if swallowed or contacted with skin.

Safety conditions:

S 2: Keep out of the reach of children.

S 3 / 7 / 9 : Store in a cool and well-ventilated place in a tightly closed container.

S 16: Keep away from sources of ignition - No smoking!

S 24 / 25 : Avoid contact with skin and eyes.       

S 29: Do not flush into drain.

S 46 : If swallowed, seek immediate medical attention and show packaging or label of the material.

S 51: Work only in well-ventilated areas.