Silicone paint Cover Sil 16 LT (base P)
- category: CHROMODOMI / Exterior paint
- Brands: CHROMODOMI
An outdoor silicone paint that can be used in wet environments. Makes the surface waterproof. It is characterized by strong adhesion, elasticity and h... See more
An outdoor silicone paint that can be used in wet environments. Makes the surface waterproof. It is characterized by strong adhesion, elasticity and high hiding power. The paint is certified and complies with EU standards.
See less
- Tools for application:
- Brush.
- Roller.
- Spray gun.
- Consumption: 8-12 m2/l per coat;
- Dilution: First coat diluted with 15% water; second coat with 5-10% water;
- Drying time: 1-2 hours depending on weather conditions;
- Protects the surface from water, moss.
- It has good vapor permeability.
- Prevents the removal of salts from the surface.
- Indoor and outdoor work
Surface Preparation:
To ensure reliable adhesion of the product, the surface must be clean, dry and free from defects such as sticky materials, dust, grease, oil, rust, moss, steam, etc. Apply the recommended primer coat (primer, waterproofing coat, putty) on new or porous surfaces. Mix the product well and apply in two coats. The product reaches full resistance to mechanical loads after 20-30 days.
Application conditions:
Do not apply at temperatures below 6°C and above 40°C with relative humidity above 80%. Adverse conditions of use may alter the quality characteristics of the product.
Keep tools in container while working in "wet" condition. Completely clean the tool from the paint and drain it back into the container, then wash the tool with warm water and soap. If the product (paint) dries, clean it off with a strong detergent only. Do not allow the used water to enter the ground water.
Safety regulations:
Keep out of reach of children. Avoid contact with skin and/or eyes. In case of contact with eyes, rinse immediately with running water and consult a doctor if necessary. If swallowed, seek medical advice immediately. The workplace must be well ventilated. Wear personal protective equipment during application. The VOC content of 40 g/l complies with the European Union requirements for this product.
Waste management:
In order not to pollute the environment, production waste must be specially treated. Therefore, do not dispose of together with household waste. Contact local authorities for more information on waste collection and disposal.
Storage:
Close the container tightly after use to save it for later use. Store in a cool place. Protect from freezing and direct sunlight.
EL.OT*7.88" refers to the characteristics of the paint and is part of the Greek standard by which the characteristics of the paint are determined.
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Silicone paint Cover Sil 16 LT (base P)
choose a product
- CHASSIS COAT 2.5LT corrosion protection enamel paint
- Water-based wood varnish, glossy WATER RED-SUN CLEAR 0,75LT
- Enamel paint for bathroom and tile TILE PAINT (base D) 2.5 l
- WOOD CARE-W Νο914 GREEN (ხის ზედაპირის დამცავი)
- Varnish for wood, glossy RED-SUN No856 MAHOGANY 2.5l
- Paint with aging effect CHALK PATNT EFFECT (BASE D) 0,375LT
- Emulsion paint NATURA-LATEX WHITE
- Silicone paint Cover Sil (base TR)
- MARTELE HAMMERED 2,5LT (paint with hammered effect)
- Emulsion paint COVER-LATEX WHITE
- Ceiling paint HYDROCHROMA ULTRA
- Silicone Facade Paint LIFE SIL (BASE D) 10LT
- MARTELE HAMMERED 0,75LT (paint with hammered effect)
- Acrylic paint for facade COVER-ACRYL (ΒΑSE Ρ) (1L. 3L. 9L. 16L)
- Primer for plasterboard - STEP PLASTER PRIMER
- Exterior primer ULTRA PRIMER 10LT
- Facade Paint – Chrome Fasad 3.5 kg A
- Silicone paint Cover Sil (base TR)
- Elastomeric cement-based paint – LIFE ACRYL FIBER ELASTIC WHITE
- Facade Paint – Chrome Fasad 25 kg C
- აკრილის საღებავი ფასადისთვის COVER-ACRYL (ΒΑSE D) 16LT
- Chrome Fasad 3.5 kg B2
- Silicone paint Cover Sil (base D)
- STEP PRIMER (primer based on acrylic emulsion)
- Chrome Fasad 10 kg B1
- Chrome Fasad 10 kg B2
- Silicone paint Cover Sil 16 LT
- Facade Paint – Chrome Fasad 10 kg B3
- Silicone Facade Paint LIFE SIL (BASE D) 10LT
- Silicone Facade Paint LIFE SIL (BASE TR) 10LT
- Tools for application:
- Brush.
- Roller.
- Spray gun.
- Consumption: 8-12 m2/l per coat;
- Dilution: First coat diluted with 15% water; second coat with 5-10% water;
- Drying time: 1-2 hours depending on weather conditions;