Semi-finished adhesive for polystyrene and all types of cement materials POLY GLUE 15KG
- category: CHROMODOMI / Exterior paint
- Brands: CHROMODOMI
POLYGLUE (Semi-ready adhesive for polystyrene and all types of cement materials) The best choice of semi-ready adhesive for polystyrene and all types... See more
POLYGLUE (Semi-ready adhesive for polystyrene and all types of cement materials)
The best choice of semi-ready adhesive for polystyrene and all types of concrete materials, suitable for both interior and exterior use.
With the proportional addition of cement, we quickly and easily create a universal adhesive that bonds polystyrene and all kinds of concrete materials with incredible adhesion power and excellent performance.
Packaging: 15 kg.
See less
Specific gravity | 1,67 |
Viscosity | 16.000 - 17.000 |
pH | 8 - 9 |
Mass fraction of solid waste | 72 - 74 |
Volume fraction of solid waste | 43 - 45 |
Application area
Application: the product is a semi-finished product and cannot be used without adding cement. When adding cement, stir slowly. Do not allow lumps to form and mix until a homogeneous mass is obtained. The cement content must correspond to the weight proportions:
- 1/1 for special mortar bonding (putty).
- 1/0,6 - 1/0,8 when using reinforcing mesh for polystyrene putty, before applying the SOVACRYL decorative layer.
Application tools:
1. Special putty trowel;
2. Putty trowel for bonding polystyrene tiles; rinse tools and wash hands until adhesive dries.
Consumption:
- For gluing polystyrene tiles 5 - 6 kg/m2
- For puttying the surface 2 - 3 kg/m2
- Consumption is calculated on the finished product (after adding cement according to the manufacturer's specification).
Drying:
- Surface drying 6-12 hours depending on conditions;
- In case of ventilated buildings the adhesive dries in 6-12 days;
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Semi-finished adhesive for polystyrene and all types of cement materials POLY GLUE 15KG
choose a product
- Elastomeric cement-based paint – LIFE ACRYL FIBER ELASTIC WHITE
- WOOD CARE-W 2,5LT (protection agent for wooden surfaces)
- Varnish for stone and concrete. STONE VARNISH WATER 2,5Lt
- Emulsion paint COVER-LATEX (BASE P) (1L. 3L. 9L. 16L)
- BLACKBOARD PAINT BLACK 0,75LT
- Water-based wood varnish, glossy WATER RED-SUN CLEAR 2.5l
- Road/Parking Paint Yellow - 4kg
- Exterior primer ULTRA PRIMER 10LT
- Wood Surface Protector - WOOD CARE No800 Transparent 2.5LT
- Gloss enamel paint – STEP-LAC 0.75 L
- MARTELE HAMMERED 2,5LT (paint with hammered effect)
- Elastomeric acrylic paint LIFE ACRYL FIBER ELASTIC (BASE) (3L, 10L)
- ნიტრო გამხსნელი THINNER 0,75LT
- Emulsion paint COVER-LATEX WHITE
- Эмульсионная краска НАТУРА-ЛАТЕКС (1л. 3л. 9л. 15л)
- Silicone Paint for Facade LIFE SIL 10LT
- Facade Paint – Chrome Fasad 10 kg C
- Chrome Fasad 10 kg A
- Chrome Fasad 10 kg B1
- STEP PRIMER (primer based on acrylic emulsion)
- Silicone paint Cover Sil 16 LT (base P)
- Silicone paint Cover Sil 16 LT
- Exterior primer ULTRA PRIMER 10LT
- Chrome Fasad 25 kg B1
- Acrylic paint for facade COVER-ACRYL (ΒΑSE Ρ) (1L. 3L. 9L. 16L)
- აკრილის საღებავი ფასადისთვის COVER-ACRYL (ΒΑSE D) 16LT
- Facade Paint – Chrome Fasad 10 kg B3
- Acrylic paint NATURA-ACRYL (1L. 3L. 9L. 15L)
- Elastomeric cement-based paint – LIFE ACRYL FIBER ELASTIC WHITE
- Silicone Facade Paint LIFE SIL (BASE D) 10LT
Specific gravity | 1,67 |
Viscosity | 16.000 - 17.000 |
pH | 8 - 9 |
Mass fraction of solid waste | 72 - 74 |
Volume fraction of solid waste | 43 - 45 |
Application area
Application: the product is a semi-finished product and cannot be used without adding cement. When adding cement, stir slowly. Do not allow lumps to form and mix until a homogeneous mass is obtained. The cement content must correspond to the weight proportions:
- 1/1 for special mortar bonding (putty).
- 1/0,6 - 1/0,8 when using reinforcing mesh for polystyrene putty, before applying the SOVACRYL decorative layer.
Application tools:
1. Special putty trowel;
2. Putty trowel for bonding polystyrene tiles; rinse tools and wash hands until adhesive dries.
Consumption:
- For gluing polystyrene tiles 5 - 6 kg/m2
- For puttying the surface 2 - 3 kg/m2
- Consumption is calculated on the finished product (after adding cement according to the manufacturer's specification).
Drying:
- Surface drying 6-12 hours depending on conditions;
- In case of ventilated buildings the adhesive dries in 6-12 days;