Elastomeric cement-based paint – LIFE ACRYL FIBER ELASTIC WHITE
- category: CHROMODOMI / Exterior paint
- Brands: CHROMODOMI
A fiber-reinforced, 100% acrylic, premium-quality elastomeric paint for exterior use. It offers high elasticity, excellent resistance to outdoo... See more
A fiber-reinforced, 100% acrylic, premium-quality elastomeric paint for exterior use.
It offers high elasticity, excellent resistance to outdoor weather conditions, and completely covers capillaries and microcracks.
Ideal for painting exterior walls, plaster, concrete, cement, and similar surfaces.
Colors: Available in white and 3 base shades.
Packaging: 750 ml, 3 L, 10 L
See less
Surface Preparation:
To ensure proper adhesion of the product, the surface must be clean, dry, and free from any defective or adhered materials, dust, grease, oil, rust, moss, and/or moisture, as well as other similar interfering factors.
Apply a primer layer (Life Dur, Life Dur Water) on the surface.
Stir the product well and apply 2 coats on the surface.
The product reaches full mechanical strength in 20–30 days.
Conditions of Use:
Do not apply at temperatures below 6°C or above 40°C, or when the relative humidity exceeds 80%. Unfavorable conditions may alter the final properties of the product.
Application Tools:
-
Brush
-
Roller
-
Spray gun (pulverizer)
During work, keep the tools in a container in a “wet” state. Return the remaining product (paint) from the tools fully back into the container and wash the tools with warm soapy water.
If the product dries, clean it only with strong cleaning agents.
Do not discharge the rinse water into soil or groundwater.
Coverage: 10–15 m²/liter on properly prepared surfaces.
Thinning: First coat – 15% with water, second coat – 5–10% with water.
Drying time: 1–2 hours, depending on application conditions.
Storage: After use, tightly close the container lid to preserve the product for future use. Store in a cool place. Protect from freezing and direct sunlight.
.png)
Products offered
delivery
*At this moment, the delivery service operates only within the scope of Tbilisi.
- When purchasing products for up to 80 GEL, the delivery price is 20 GEL;
- When purchasing products in the amount of 80 to 700 GEL, the delivery price is determined on the basis of: 1 km - 2.80 GEL;
- When purchasing products worth more than GEL 700, delivery is free (Tbilisi);
*At this moment delivery service outside the city is not available.
Delivery time:
Tbilisi: Delivery time: 3-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Elastomeric cement-based paint – LIFE ACRYL FIBER ELASTIC WHITE
choose a product
- Anti-corrosion primer. METAL PRIMER (black) 2.5 l
- Ceiling paint HYDROCHROMA ULTRA
- Varnish for wood, glossy RED-SUN No857 0REGON 2.5l
- Silicone Facade Paint LIFE SIL (BASE D) 10LT
- WOOD CARE-W 0.75LT (protection agent for wooden surfaces)
- MARTELE HAMMERED 0,75LT (paint with hammered effect)
- Emulsion paint COVER-LATEX (BASE P) (1L. 3L. 9L. 16L)
- Varnish for wood, glossy RED-SUN No859 DARK CHESTNUT 2.5 l
- WOOD CARE-W Νο903 WALNUT LIGHT (ხის ზედაპირის დამცავი)
- Water-based wood varnish, glossy WATER RED-SUN CLEAR 0,75LT
- Varnish for stone and concrete. STONE VARNISH WATER 2,5Lt
- ნიტრო გამხსნელი THINNER 0,75LT
- Emulsion paint COVER-LATEX (BASE D) 16L
- Emulsion paint COVER-LATEX WHITE
- Exterior primer ULTRA PRIMER 10LT
- Acrylic paint for facades COVER-ACRYL WHITE
- Facade Paint – Chrome Fasad 10 kg B3
- Chrome Fasad 10 kg B2
- Acrylic paint NATURA-ACRYL (1L. 3L. 9L. 15L)
- Chrome Fasad 25 kg B1
- აკრილის საღებავი ფასადისთვის COVER-ACRYL (ΒΑSE D) 16LT
- Chrome Fasad 3.5 kg B1
- Exterior primer ULTRA PRIMER 10LT
- Silicone paint Cover Sil (base D)
- Facade Paint – Chrome Fasad 25 kg B3
- Silicone paint Cover Sil 16 LT
- Facade Paint – Chrome Fasad 3.5 kg C
- Silicone paint Cover Sil 16 LT (base P)
- Silicone Facade Paint LIFE SIL (BASE D) 10LT
- Facade Paint – Chrome Fasad 3.5 kg A
Surface Preparation:
To ensure proper adhesion of the product, the surface must be clean, dry, and free from any defective or adhered materials, dust, grease, oil, rust, moss, and/or moisture, as well as other similar interfering factors.
Apply a primer layer (Life Dur, Life Dur Water) on the surface.
Stir the product well and apply 2 coats on the surface.
The product reaches full mechanical strength in 20–30 days.
Conditions of Use:
Do not apply at temperatures below 6°C or above 40°C, or when the relative humidity exceeds 80%. Unfavorable conditions may alter the final properties of the product.
Application Tools:
-
Brush
-
Roller
-
Spray gun (pulverizer)
During work, keep the tools in a container in a “wet” state. Return the remaining product (paint) from the tools fully back into the container and wash the tools with warm soapy water.
If the product dries, clean it only with strong cleaning agents.
Do not discharge the rinse water into soil or groundwater.