Exterior primer ULTRA PRIMER 10LT
- category: ლაქ-საღებავები და აქსესუარები / CHROMODOMI / ექსტერიერის საღებავი
- Brands: CHROMODOMI
Special water-based primer for exterior work before the last coat, with a high degree of covering power. The primer cures the already applied adhesive... See more
Special water-based primer for exterior work before the last coat, with a high degree of covering power. The primer cures the already applied adhesive, so the last coat will be applied perfectly, reduces the cost of plastering works, completely covers the adhesive and ensures uniformity of painting. Suitable for any top coat of plaster of your choice (acrylic, silicone, granite, etc)
See less
- Color: available in white and in many colors thanks to our painting system.
- Packaging: 5 kg; 15 kg.
Application area:
Surface preparation:
- The surface must be clean, dry and free from defects such as sticky materials, dust, grease, oil, rust, moss, steam, etc. to ensure a good adhesion of the product.
- Apply the primer with a brush or roller and wait for it to dry for 1-2 hours.
- Then apply the top coat
- Reaches full resistance to mechanical loads after 20-30 days.
Operating conditions:
- Do not apply at temperatures below 6 °C and above 40 °C and relative humidity above 80%. Unfavorable conditions of use may change the quality properties of the product.
Application tools:
- Brush
- Roller (roller).
Keep the tools in the container "wet" during work. Completely drain the paint from the tools back into the container and wash the tools with warm water and soap. If the paint has dried, only scrub it off with a strong detergent. Do not allow used water to reach groundwater.
- Consumption: 18 - 22 m2/kg per one layer;
- Dilution: 5-10% of water;
- Drying time: 1-2 hours, depending on application conditions;
Safety rules: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of contact with eyes, rinse immediately with running water, if necessary consult a doctor. In case of swallowing, seek medical advice immediately. The working area should be well ventilated. Wear personal protective equipment during application.
Waste Management:
- In order not to pollute the environment, production waste requires special treatment. Therefore, do not dispose of them together with household waste. For more information on waste collection and disposal, contact the local authorities.
Products offered
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 300, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Exterior primer ULTRA PRIMER 10LT
choose a product
- XYLO-FINE No16 TEAK 200gr
- WATER FLOOR VARNISH 2,5LT
- COVER-ACRYL
- STEP-LATEX HIGH LEVEL (BASE P) 10LT
- Enamel 3 in 1.FAST & Right (base D) 2.5 l
- POLY GLUE 15KG
- WOOD CARE-W 2,5LT (ხის ზედაპირის დამცავი)
- MARTELE HAMMERED 2,5LT (საღებავი დაჩაქუჩებული ეფექტით)
- ემალის ანტიკოროზიული საღებავი CHASSIS COAT 0,75LT
- HYDRROCHROMA ULTRA
- STONE VARNISH WATER 0,75Lt
- Varnish for stone and concrete, semi-gloss STONE VARNISH WATER MATT 2.5 l
- MARTELE HAMMERED 0,75LT (საღებავი დაჩაქუჩებული ეფექტით)
- RED-SUN No859 DARK CHESNUT 2,5LT
- Silicone paint Cover Sil (base TR)
- Color: available in white and in many colors thanks to our painting system.
- Packaging: 5 kg; 15 kg.
Application area:
Surface preparation:
- The surface must be clean, dry and free from defects such as sticky materials, dust, grease, oil, rust, moss, steam, etc. to ensure a good adhesion of the product.
- Apply the primer with a brush or roller and wait for it to dry for 1-2 hours.
- Then apply the top coat
- Reaches full resistance to mechanical loads after 20-30 days.
Operating conditions:
- Do not apply at temperatures below 6 °C and above 40 °C and relative humidity above 80%. Unfavorable conditions of use may change the quality properties of the product.
Application tools:
- Brush
- Roller (roller).
Keep the tools in the container "wet" during work. Completely drain the paint from the tools back into the container and wash the tools with warm water and soap. If the paint has dried, only scrub it off with a strong detergent. Do not allow used water to reach groundwater.
- Consumption: 18 - 22 m2/kg per one layer;
- Dilution: 5-10% of water;
- Drying time: 1-2 hours, depending on application conditions;
Safety rules: Keep out of reach of children. Avoid contact with skin and/or eyes. In case of contact with eyes, rinse immediately with running water, if necessary consult a doctor. In case of swallowing, seek medical advice immediately. The working area should be well ventilated. Wear personal protective equipment during application.
Waste Management:
- In order not to pollute the environment, production waste requires special treatment. Therefore, do not dispose of them together with household waste. For more information on waste collection and disposal, contact the local authorities.